Hey all. My first problem with my car. Its a 07 GT with a brenspeed tune and c&l intake. When pushing my clutch in to stop, my rpms drop to about 200-300 then stalls. Sometimes it will jump back up to 800-1000, but mostly just stalls. Any ideas? Is there something I can adjust to increase the rpms? Something going bad? I have no idea. Thanks all

 

Clean MAF and throttle-body, then check for cracked tubing (ie. vacuum leak).

 

95% chance, scratch that, 98% chance it's just a dirty tb. 3 minute, $4.00 fix.

 

Also, if you recently replaced or disconnected the battery, then the erratic idle can be caused by the ECU re-learning the idle. If this is the case, it should resolve itself after 20-50 miles of driving.

 

Assuming you just installed this, or have had it on for a while? Firstly check all fittings and connections, and then a cleaning wouldn't hurt. Make sure you didn't forget to hook everything back up obviously.

 

Going to look at it now. I just recently reinstalled my intake a few days ago after I got my inspection sticker. Going to clean it, and double check all the connections. I've been using this intake tune for about 4 years now no problem. Thanks, let you all know how i make out

 

+1 on the dirty TB. That's where my $$ is.

 

That thing was dirtyyyyyyyy! All cleaned up, back together now. Took it for a quick trip and my rpms dont go below 950-1100 when the clutch is fully engaged. Awesome! Thanks guys!

 

Yeah, baby!

 

Shocking