After having my car since February, I finally got around to getting the springs to lower the beast. Hoping to get it done on Sunday.

Went with the Steeda Utralites.

 

nice! can't wait to see it!

 

Good choice! Who's doing the install?

 

I'll be doing it myself (with a little help from my son).

 

Sweet! Look forward to seeing pics once you are finished with the install.

 

Here is a before shot.

 

Nice choice on the springs! Post a pic once they're installed.

 

very nice....make sure to pay close attention when compressing the springs to remove the upper strut mount, it tends to separate and the bearings shift around and come out. I've only done one newer model so far, 2013, and no matter how careful I was, they both came apart on me. I had to pick each one of the bearings up, put them back in their place and reassemble them. All was good.

 

Thanks 05, I will definitely keep an eye on those bearings!

 

Missing a few parts...

Koni STR.T Shock/Struts

http://www.steeda.com/store/steeda-2...ut-mounts.html

http://www.bmrsuspension.com/?page=p...&productid=172

Can get it all here...

http://www.stranoparts.com/searchbym...208&ModelID=35