2013 MSD 2-Step Having Issues...
#1
2013 MSD 2-Step Having Issues...
I am having the biggest bitch of a time to get this thing to work.
I am using the MSD 2Step with a Rocker switch /w LED built in (3 prong) and according to the switches diagram I am to either run
(2 Ground 1 Power)
Bottom Prong = 12v
Middle Prong = Either Accessory Ground (blue wire)
LED Prong = Ground
or
(1 Ground 2 Power)
Bottom Prong = 12v
Middle Prong = Accessory Power (blue/white)
LED Prong = Ground
I attempted the first way 2G1P and the LED would work the 2step would work with key on but when running wouldn't turn on with switch
so I then changed it over to the 2nd method 1G2P and everything works except I am having a issue with actually running the launch control
I'll stop flip the switch (have it set for 2700) put my foot to the floor 2step is working i'll let off the clutch to slip it and i'll start moving but as soon as I hit the 2700 again the damn thing re-engages
when i'm slipping the clutch I looked at my RPM and they don't drop below 2000 so it shouldn't re-engage but it does..
Did I do something wrong?
I am using the MSD 2Step with a Rocker switch /w LED built in (3 prong) and according to the switches diagram I am to either run
(2 Ground 1 Power)
Bottom Prong = 12v
Middle Prong = Either Accessory Ground (blue wire)
LED Prong = Ground
or
(1 Ground 2 Power)
Bottom Prong = 12v
Middle Prong = Accessory Power (blue/white)
LED Prong = Ground
I attempted the first way 2G1P and the LED would work the 2step would work with key on but when running wouldn't turn on with switch
so I then changed it over to the 2nd method 1G2P and everything works except I am having a issue with actually running the launch control
I'll stop flip the switch (have it set for 2700) put my foot to the floor 2step is working i'll let off the clutch to slip it and i'll start moving but as soon as I hit the 2700 again the damn thing re-engages
when i'm slipping the clutch I looked at my RPM and they don't drop below 2000 so it shouldn't re-engage but it does..
Did I do something wrong?
#2
NEVERmind I am an idiot!
A friend sent me his wiring diagram but he has linelock as well and I was just skipping the LineLock side of things but forgot to realize he was using his LineLock momentary switch for his launch control too
Shakes My Head! This is why I hate electrical lol
A friend sent me his wiring diagram but he has linelock as well and I was just skipping the LineLock side of things but forgot to realize he was using his LineLock momentary switch for his launch control too
Shakes My Head! This is why I hate electrical lol
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM