Help! throwing codes
#1
Help! throwing codes
P0174 System to lean bank 2
P0135 o2 circuit bank 1 sensor 1
P2197 o2 sensor signal stuck lean bank 2 sensor 1
P0135 o2 greater circuit bank 1 sensor 1
P0174 system to lean bank 2
Do I just need to replace those two sensors or is something else causing these problems?
I'm planning on ordering the 2 sensors from rockauto.com they got the motor craft sensors for cheap. I was told the car only has one upstream and one downstream sensor but I've read it has two up and two downstream sensors.
how many are their?
and which motorcraft part number should i be ordering? I'm seeing more then a few different ones from different stores but rockauto.com has DY1039 and DY1058, are those the two i need?
Can anybody help me??!!?
P0135 o2 circuit bank 1 sensor 1
P2197 o2 sensor signal stuck lean bank 2 sensor 1
P0135 o2 greater circuit bank 1 sensor 1
P0174 system to lean bank 2
Do I just need to replace those two sensors or is something else causing these problems?
I'm planning on ordering the 2 sensors from rockauto.com they got the motor craft sensors for cheap. I was told the car only has one upstream and one downstream sensor but I've read it has two up and two downstream sensors.
how many are their?
and which motorcraft part number should i be ordering? I'm seeing more then a few different ones from different stores but rockauto.com has DY1039 and DY1058, are those the two i need?
Can anybody help me??!!?
#3
P0174 System to lean bank 2
P0135 o2 circuit bank 1 sensor 1
P2197 o2 sensor signal stuck lean bank 2 sensor 1
P0135 o2 greater circuit bank 1 sensor 1
P0174 system to lean bank 2
Do I just need to replace those two sensors or is something else causing these problems?
I'm planning on ordering the 2 sensors from rockauto.com they got the motor craft sensors for cheap. I was told the car only has one upstream and one downstream sensor but I've read it has two up and two downstream sensors.
how many are their?
and which motorcraft part number should i be ordering? I'm seeing more then a few different ones from different stores but rockauto.com has DY1039 and DY1058, are those the two i need?
Can anybody help me??!!?
P0135 o2 circuit bank 1 sensor 1
P2197 o2 sensor signal stuck lean bank 2 sensor 1
P0135 o2 greater circuit bank 1 sensor 1
P0174 system to lean bank 2
Do I just need to replace those two sensors or is something else causing these problems?
I'm planning on ordering the 2 sensors from rockauto.com they got the motor craft sensors for cheap. I was told the car only has one upstream and one downstream sensor but I've read it has two up and two downstream sensors.
how many are their?
and which motorcraft part number should i be ordering? I'm seeing more then a few different ones from different stores but rockauto.com has DY1039 and DY1058, are those the two i need?
Can anybody help me??!!?
There are 4 sensors.
4.0L V6 Upstream & Downstream Sensor Locations
Both upstream sensors are screwed into the exhaust pipe right below the exhaust manifold flanges
Both downstream sensors are located in the catalytic converters
I hope this is useful.
#7
take it to a dealer and they will take some money but will tell you exactly whats wrong....then you can go somehwere cheaper to get it fixed. People make threads asking for what wrong and they rarely ever get a correct response, so its better to just go to the dealer rather then spending time and money fixing whats not wrong.
#9
If you have not bought your O2 sensors, I prefer to buy mine from Ford in the hope that they may be more accurate. Since mine are involved in many code issues, owning the sensor that matches the ECU seems logical.
If you have purchased the Rock Auto sensors, i would use them as I have heard few complaints.
If you have purchased the Rock Auto sensors, i would use them as I have heard few complaints.