4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Please help diagnosing an O2 sensor problem!

Thread Tools
 
Search this Thread
 
Old 04-27-2006, 02:38 PM
  #1  
Gaspi101
3rd Gear Member
Thread Starter
 
Gaspi101's Avatar
 
Join Date: Feb 2005
Location: Florida
Posts: 655
Default Please help diagnosing an O2 sensor problem!

Hey all. Yesterday I got a check engine light, and the code was for Short Term Fuel Trim Too Rich. Naturally, I suspected the O2 sensors. Apparently, BOTH of the Bank 1 and Bank 2 Sensor 2s are dead. What I want to ask is this: Are the Bank 1 and Bank 2 sensor 2s on ONE side of the exhaust, meaning, the pre and after catalytic sensors, or are these both the after cat sensors from both sides?

I suspect they are the after cat sensors from both sides, and if that's the case, what could cause both of them to suddenly stop working? I could understand one of them, sure. And I could understand two sensors, if they were the pre and after cat sensors on one side, which would likely indicate a bad catalytic converter--but BOTH after cat sensors from both sides? What could have caused that?

I'd appreciate any help at all. THANKS!!!
Gaspi101 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CS2007
General Tech
8
06-25-2019 09:45 PM
69Volunteer
Classic Mustang General Discussion
1
09-30-2015 10:39 AM
gagemcc
V6 (1994-2004) Mustangs
0
08-26-2015 12:37 AM
Verado
V6 (1994-2004) Mustangs
0
06-23-2006 02:53 AM
matt6210
Parts For Sale
0
10-17-2005 04:37 PM



Quick Reply: Please help diagnosing an O2 sensor problem!



All times are GMT -5. The time now is 02:48 AM.