BBK LT's
#2
RE: BBK LT's
You have 972 posts and you havent read about this yet? Geez. I don't have LT's, but apparantly you need to pull the motor or take out the K member to install them. Dont really know too much, but everything I've read on here seems to suggest to pay a shop a couple hundred to put em on.
Matt
Matt
#3
RE: BBK LT's
The Long Tube install is complicated but can be done with time and patience and a good lift! Ive heard Shops charge anywhere from $350-600 for installs! Good luck and make sure when you get them done get it done right
#4
RE: BBK LT's
It sucks... i did it myself. I have a writeup on how bad it sucked on here somewhere. Search my posts in january'ish.
Anyone that tell you to do it just by unbolting the motor and jacking one side up needs their head examined. I had the damn kmember completely out and still had a little trouble tightening a 2 bolts on each side.
Anyone that tell you to do it just by unbolting the motor and jacking one side up needs their head examined. I had the damn kmember completely out and still had a little trouble tightening a 2 bolts on each side.
#6
RE: BBK LT's
https://mustangforums.com/m_912792/tm.htm
Haha, i found it and read it... brings back good times. Don't regret it at all though, i learned so much.
Haha, i found it and read it... brings back good times. Don't regret it at all though, i learned so much.
#9
RE: BBK LT's
ORIGINAL: czwalga00gt
It sucks... i did it myself. I have a writeup on how bad it sucked on here somewhere. Search my posts in january'ish.
Anyone that tell you to do it just by unbolting the motor and jacking one side up needs their head examined. I had the damn kmember completely out and still had a little trouble tightening a 2 bolts on each side.
It sucks... i did it myself. I have a writeup on how bad it sucked on here somewhere. Search my posts in january'ish.
Anyone that tell you to do it just by unbolting the motor and jacking one side up needs their head examined. I had the damn kmember completely out and still had a little trouble tightening a 2 bolts on each side.
I dunno, but the K member seemed like alot to take apart just for this? I can see how it would make acess easyer, but still.
BTW stanger88, I think MCP in st. louis will do a LT install pretty cheap. They only charge labor by the hour (usually) so they will quote you a time price, and they are usually fast.
#10
RE: BBK LT's
ORIGINAL: stanger88
are shorties just as hard to install?
are shorties just as hard to install?
Probably not but close... hell have you taken a look at your engine bay? Putting anything in from up top makes my want to cry. IF you do it... get LT's and a tune, or just save for a s/c.