4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

MAC h pipe

Thread Tools
 
Search this Thread
 
Old Oct 5, 2006 | 01:07 PM
  #11  
dmrush26's Avatar
dmrush26
Thread Starter
1st Gear Member
 
Joined: Sep 2006
Posts: 60
From: Humble, Tx
Default RE: MAC h pipe

Also check this out: http://www.latemodelrestoration.com/...0%201&comp=LRS
Old Oct 5, 2006 | 01:20 PM
  #12  
rbstang's Avatar
rbstang
6th Gear Member
 
Joined: Apr 2005
Posts: 5,608
From: Wilmington, NC
Default RE: MAC h pipe

ORIGINAL: dmrush26

Also check this out: http://www.latemodelrestoration.com/...0%201&comp=LRS
brent sells them cheaper... pending on where you live.
Old Oct 5, 2006 | 01:25 PM
  #13  
dmrush26's Avatar
dmrush26
Thread Starter
1st Gear Member
 
Joined: Sep 2006
Posts: 60
From: Humble, Tx
Default RE: MAC h pipe

Who's Brent and where is he located?
Old Oct 5, 2006 | 01:28 PM
  #14  
Tapeuup's Avatar
Tapeuup
I ♥ Acer
 
Joined: Oct 2006
Posts: 164
From:
Default RE: MAC h pipe


ORIGINAL: dmrush26

Also check this out: http://www.latemodelrestoration.com/...0%201&comp=LRS
I would pay the little extra for the black pipe, it won't dent as easy.
Old Oct 5, 2006 | 01:29 PM
  #15  
rbstang's Avatar
rbstang
6th Gear Member
 
Joined: Apr 2005
Posts: 5,608
From: Wilmington, NC
Default RE: MAC h pipe

www.brenspeed.com

nice guy. does free shipping on like everything too.

i just did a estimated shipping cost from 50resto and...
MAC O/R H - 129.95
Shipping to 22180 - 24.95
Total 154.90

Brent
MAC O/R H - $150
Shipping - $0
Total $150
Old Oct 5, 2006 | 03:11 PM
  #16  
anthony7676's Avatar
anthony7676
1st Gear Member
 
Joined: Jun 2006
Posts: 113
From:
Default RE: MAC h pipe

Yes brent is the way to go. I got my MAc o/r h and tri-ax from him. I will be going back to him when i need other mods.-anthony
Old Oct 5, 2006 | 05:22 PM
  #17  
dmrush26's Avatar
dmrush26
Thread Starter
1st Gear Member
 
Joined: Sep 2006
Posts: 60
From: Humble, Tx
Default RE: MAC h pipe

BBK doesn't make a h pipe for 99-04 mustangs do they? I noticed they make an catted x pipe. I'll venture to say that the BBK x pipe is better than the MAC h or x pipe right?
Old Oct 5, 2006 | 05:32 PM
  #18  
ASUSMC's Avatar
ASUSMC
4th Gear Member
 
Joined: Apr 2006
Posts: 1,409
From:
Default RE: MAC h pipe

I have the O/R Prochamber H that I found online from AMP. I don't trust AMP cause I know some of the guys that work there but I found it on e-bay called them up and went to pick it up. Cost me $100 cash it was used but its not just an H it is the prochamber so I think I got a good deal.
Old Oct 5, 2006 | 06:05 PM
  #19  
burn64's Avatar
burn64
2nd Gear Member
 
Joined: Jul 2006
Posts: 328
From: Tampa, FL
Default RE: MAC h pipe

EBAY

I got mine for $67 Used + shipping, they have them for $135 or so new including shipping.

I got my Long Tube Headers for $171 from the same guy and combined the shipping costs.
Old Oct 5, 2006 | 06:13 PM
  #20  
dmrush26's Avatar
dmrush26
Thread Starter
1st Gear Member
 
Joined: Sep 2006
Posts: 60
From: Humble, Tx
Default RE: MAC h pipe

burn64 i usually check EBAY all the time. Thats pretty much the only other website i check out at work. LOL. Sometimes i find good deals on EBAY sometimes i don't. Plus ive been burned a couple times and don't want to have to go through that again. Now i check the other person's feedback and email them a few times and kinda decide if i feel comfortable with them.



All times are GMT -5. The time now is 08:37 AM.