4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Fuel safety switch

Thread Tools
 
Search this Thread
 
Old 05-10-2007, 12:48 AM
  #1  
FrostByte
5th Gear Member
Thread Starter
 
FrostByte's Avatar
 
Join Date: Jun 2006
Location: NY
Posts: 2,307
Default Fuel safety switch

When the fuel switch gets activateddoes the button pop up?

I had my car taken to the dyno tuners on a flat bed. He hit some good sized bumps on the way there but not any thing thatI would have thought would have set it off. The car ran before the trip altho really ****ty w/ the big injectors & no tune. The dyno shop called me & told they had made the adjustment for the larger injectors but the car wouldn't start, wouldnt even fire. I drove down tonight & tried to start the car, it would crank but absoloutly NO fire. I opened the trunk & checked the switch. I pushed on it, didnt seem to move or click. I tried the car again & it started right up. Not sure if it was the switch or I had just cleared out the fouled plugs by holding down thee accel pedal while cranking earlier.
FrostByte is offline  
Old 05-10-2007, 12:55 AM
  #2  
oxfordgt
6th Gear Member
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 6,448
Default RE: Fuel safety switch

The inertia switch does pop up but not much.
oxfordgt is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PaulH2
Members Rides and Car Show Section
20
01-31-2016 09:48 AM
b8checker
Classic Mustangs (Tech)
8
10-08-2015 12:55 PM
svfetter
5.0L (1979-1995) Mustang
9
10-05-2015 11:39 AM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
mrappe
V6 (1994-2004) Mustangs
0
09-26-2015 10:16 AM



Quick Reply: Fuel safety switch



All times are GMT -5. The time now is 08:47 AM.