4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

got my bearing kit and its uncomplete

Old Jun 27, 2007 | 06:49 PM
  #1  
stangdriver2007's Avatar
stangdriver2007
Thread Starter
2nd Gear Member
 
Joined: Feb 2007
Posts: 403
From: Ohio
Default got my bearing kit and its uncomplete

i ordered the bearing kit from american muscle and its missing the cover gasket and a lot of the shims they are good people though they are sending me a whole new bearing kit and he said i dont have t osend the old one back everything inside was mixed around cuz the vaccuum seal was broke but they are good people o well it will just delay the install a few days
Old Jun 30, 2007 | 02:32 PM
  #2  
stangdriver2007's Avatar
stangdriver2007
Thread Starter
2nd Gear Member
 
Joined: Feb 2007
Posts: 403
From: Ohio
Default RE: got my bearing kit and its uncomplete

well i got the second kit and yea well its not all there either still missing the gasket and all i want is that and they wont just send me the gasket they insist on sending the whole kit again but whatever they dont even want any others back each one is 80 bucks
Old Jun 30, 2007 | 05:22 PM
  #3  
96GT226410's Avatar
96GT226410
CSMG Moderator
 
Joined: Mar 2006
Posts: 3,503
From: New Jersey
Default RE: got my bearing kit and its uncomplete

What does "uncomplete" mean? [8D]... That sucks about the mess up. It's nice to know that they fixed their screw up. American Muscle customer satisfaction FTW!
Old Jun 30, 2007 | 05:24 PM
  #4  
stangdriver2007's Avatar
stangdriver2007
Thread Starter
2nd Gear Member
 
Joined: Feb 2007
Posts: 403
From: Ohio
Default RE: got my bearing kit and its uncomplete

uncomplete as in missing parts they said he put a note on the order to check package for a complete kit i mean all i need is the gasket im gonna have extra kits laying around
Old Jun 30, 2007 | 05:33 PM
  #5  
cliffyk's Avatar
cliffyk
TECH SAVANT
 
Joined: Dec 2006
Posts: 10,937
From: Saint Augustine, FL
Default RE: got my bearing kit and its uncomplete

Iam certainthe author meant to say "incomplete", nonetheless the second kit as reported is not "incomplete" as there is no gasket shown on the OEM parts diagram. Gasket's are available should one wish for some incomprehensiblereason to use same--however hi-temp gray RTV sealant (and clean surfaces) will seal better and last longer thanmost gaskets...
Old Jul 1, 2007 | 07:24 PM
  #6  
stangdriver2007's Avatar
stangdriver2007
Thread Starter
2nd Gear Member
 
Joined: Feb 2007
Posts: 403
From: Ohio
Default RE: got my bearing kit and its uncomplete

ORIGINAL: cliffyk

Iam certainthe author meant to say "incomplete", nonetheless the second kit as reported is not "incomplete" as there is no gasket shown on the OEM parts diagram. Gasket's are available should one wish for some incomprehensiblereason to use same--however hi-temp gray RTV sealant (and clean surfaces) will seal better and last longer thanmost gaskets...
how about you go to american muscle where i bought it from and look and see that there is a gasket instead of trying to make me sound stupid when u must be cuz u didnt even look at the right place I DIDNT BUY OEM I BOUGHT THE ONLY ONE AMERICAN MUSCLE SELLS AND ITS MADE BY MOTIVE
Old Jul 1, 2007 | 07:32 PM
  #7  
svt_97cobra's Avatar
svt_97cobra
I ♥ Acer
 
Joined: Apr 2007
Posts: 1,218
From:
Default RE: got my bearing kit and its uncomplete

ORIGINAL: stangdriver2007

ORIGINAL: cliffyk

Iam certainthe author meant to say "incomplete", nonetheless the second kit as reported is not "incomplete" as there is no gasket shown on the OEM parts diagram. Gasket's are available should one wish for some incomprehensiblereason to use same--however hi-temp gray RTV sealant (and clean surfaces) will seal better and last longer thanmost gaskets...
how about you go to american muscle where i bought it from and look and see that there is a gasket instead of trying to make me sound stupid when u must be cuz u didnt even look at the right place I DIDNT BUY OEM I BOUGHT THE ONLY ONE AMERICAN MUSCLE SELLS AND ITS MADE BY MOTIVE
[hr]

Theres no need to be a smart ***
Old Jul 1, 2007 | 08:55 PM
  #8  
Triisomy21's Avatar
Triisomy21
4th Gear Member
 
Joined: Apr 2006
Posts: 1,052
From:
Default RE: got my bearing kit and its uncomplete

ORIGINAL: stangdriver2007

ORIGINAL: cliffyk

Iam certainthe author meant to say "incomplete", nonetheless the second kit as reported is not "incomplete" as there is no gasket shown on the OEM parts diagram. Gasket's are available should one wish for some incomprehensiblereason to use same--however hi-temp gray RTV sealant (and clean surfaces) will seal better and last longer thanmost gaskets...
how about you go to american muscle where i bought it from and look and see that there is a gasket instead of trying to make me sound stupid when u must be cuz u didnt even look at the right place I DIDNT BUY OEM I BOUGHT THE ONLY ONE AMERICAN MUSCLE SELLS AND ITS MADE BY MOTIVE
Don't be a d-bag. Old man cliffy was simply telling you that the OEM diagram doesn't show one. Therefore you probably don't have one on your car right now. He was also saying that RTV sealant will do a better job than the gasket you're crying about.

Just take it easy man. Cliff is a very smart guy. He was offering help...not sarcasm.
Old Jul 1, 2007 | 09:59 PM
  #9  
undecided.steve's Avatar
undecided.steve
4th Gear Member
 
Joined: Sep 2006
Posts: 1,031
From:
Default RE: got my bearing kit and its uncomplete


ORIGINAL: Triisomy21


Just take it easy man. Cliff is a very smart guy. He was offering help...not sarcasm.
+1
I enjoy reading Cliff's posts.
Old Jul 2, 2007 | 06:15 PM
  #10  
stangdriver2007's Avatar
stangdriver2007
Thread Starter
2nd Gear Member
 
Joined: Feb 2007
Posts: 403
From: Ohio
Default RE: got my bearing kit and its uncomplete

i know i read his posts all the time and he definatly seems to know what he is talking about but even though the diagram doesnt show one there is one and motive sells it in the kit

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:25 PM.