4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

DriveTrain Problem??

Thread Tools
 
Search this Thread
 
Old 07-04-2007, 10:21 PM
  #1  
bhammett07
Thread Starter
 
bhammett07's Avatar
 
Join Date: Jun 2007
Location:
Posts: 16
Default DriveTrain Problem??

Ok guys...from start to finish i want to describe my issue.I get in the car go into reverse to leave my house ...everything is fine.As soon as i put the car in 1st i can hear a clunk noise.I give it gas....clunk...let off on gas clunk.The noise/clunk is more apparent at lower gears and seems to dissipate once i get through the higher gears.I can also feel the clunk through the shifter it self.Once i have been driving the car awhile and i start from a stop.There seems to be a vibration on gears 1 and 2 at lower rpms.Then clears up.Also the vehicle at slow speeds in the parking lot after its warmed up also makes a vibration/binding when turning?Now i think that it may be U-joints?However i havent found anything really wrong with them.But the only way i have tested is turning the driveshaft by hand and looking at the joint??Any other ideas?
bhammett07 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM
tj@steeda
Archive - Mustangs For Sale
0
09-17-2015 07:32 PM
rksnow1
Motor Swap Section
0
09-14-2015 08:46 PM
Ryan Fitzpatrick
New Member Area
3
09-14-2015 02:21 AM
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM



Quick Reply: DriveTrain Problem??



All times are GMT -5. The time now is 12:40 PM.