Debage problem

Reply Subscribe

Thread Tools

Search this Thread

Apr 11, 2005 | 02:55 AM

Wolfe008

Thread Starter

2nd Gear Member

Joined: Apr 2005

Posts: 235

From:

Debage problem

So I went to debage the FORD emblem off the back of my cobra and I heat it up and try the floss technique and it dont work too well so I just pull the **** out and it turns out there are like two prongs from the emblem going into two HOLES in the ****in back...WTF...so it looks like i'm not gonna be removing that emblem anymore...does anyone have any f'in suggestions...

Apr 11, 2005 | 03:38 AM

jdaniel

I ♥ Acer

Joined: Apr 2004

Posts: 9,172

From:

RE: Debage problem

A screwdriver and a hammer might work.

Apr 11, 2005 | 10:19 AM

code3GT

Mustang Nazi

Joined: Sep 2004

Posts: 13,444

From: Texas, baby

RE: Debage problem

Quote:

ORIGINAL: Wolfe008

So I went to debage the FORD emblem off the back of my cobra and I heat it up and try the floss technique and it dont work too well so I just pull the **** out and it turns out there are like two prongs from the emblem going into two HOLES in the ****in back...WTF...so it looks like i'm not gonna be removing that emblem anymore...does anyone have any f'in suggestions...

Uh...no. Just put it back.

Apr 11, 2005 | 07:23 PM

gt96stang

5th Gear Member

Joined: Mar 2005

Posts: 3,689

From: Navarre, FL

RE: Debage problem

Keep it on there so that way you don't have those holes showing. Or replace them with something else to cover them.

Apr 12, 2005 | 07:09 AM

Broken

1st Gear Member

Joined: Feb 2005

Posts: 119

From:

RE: Debage problem

Quote:

ORIGINAL: jdaniel

A screwdriver and a hammer might work.

HAHA! And if that is to much work a set of torches and a crowbar will deffinetly remove the badge!

Apr 12, 2005 | 07:12 AM

Broken

1st Gear Member

Joined: Feb 2005

Posts: 119

From:

RE: Debage problem

Quote:

Really? I was thinking of doing the same thing to my car later this summer. That stinks! But I guess you could fill in the holes by heating up a crayon that matches your paint color and smooshing it into the holes.