Spray them with CRC-556. WD-40, or some other penetrating lube and then coax and conjole them 'til they come out.

That's a 14 year-old car you're playing with--according to the Federal government it should have been in a junk yard two years ago...

 

yeah i cut the sensors off... and i still can't get them out of the holes with a tap and a hammer.

 

i didnt remove my abs sensors, i just lightly pushed the axle in about 1/4-1/2" and pulled them out.....mine didnt break

 

I have seen that, I've seen some in which the sensor housing was pushed back off of the brass mounting bushing, and I've seen some smashed all to crap.

Here's a photo of one pushed back, before I fixed it, in a friend's car after he got a "real good deal" on having gears installed at a local auto repair place...

 

looks better then mine.... o well. I still can't get the differential out yet... haven't tried much though.