4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

hey got a problem

Thread Tools
 
Search this Thread
 
Old Sep 16, 2005 | 02:38 AM
  #1  
rx7pl's Avatar
rx7pl
Thread Starter
 
Joined: Sep 2005
Posts: 35
Default hey got a problem

Hey everyone I got a problem with my gt. The car runs perfect for 30minutes than i start to get problems,the car stubber and wont pass 4krpms and it's acting like it's got missfire when it does that.I checked the spark plugs and injectors for ohms they are all good.The car sometimes dies when it starts to stubbering when I come to the light,the car shakes.I also have a buddy who got a obd2 checker we checked it for codes and iat high input pooped out.p0133 code think. I was also wondering could it be the tps sensor,because it only does that when i drive it for more than 30minutes.Please help me with my problem.
thanks jacob
Old Sep 16, 2005 | 07:37 AM
  #2  
02StanGT's Avatar
02StanGT
4th Gear Member
 
Joined: Apr 2005
Posts: 1,036
From:
Default RE: hey got a problem

It sounds like you need a new IAT sensor, as you already stated. The reason it runs good for thirty minutes is, your engine ( when started cold ) doesn't look at the Intake Air Temperature ( IAT ) for the fuel delivery til it is warmed up ( if I remember right ). If the code says its the IAT, then change the sensor.
Old Sep 16, 2005 | 08:05 AM
  #3  
04BlueGT's Avatar
04BlueGT
5th Gear Member
 
Joined: Jul 2005
Posts: 2,387
From: Georgia
Default RE: hey got a problem

That code is not for the IAT sensor. That is the "O2 sensor CKT slow response Bank 1, Sensor 1." Either you listed the wrong code, or you need a new O2 sensor.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mustangfan305
5.0L (1979-1995) Mustang
2
Aug 31, 2015 07:18 AM
1st 4 eyed fox
General Tech
2
Aug 24, 2015 06:56 PM
drumhedd2005
2005-2014 Mustangs
2
Aug 13, 2015 09:59 AM
Mignav001
New Member Area
4
Aug 11, 2015 02:28 PM




All times are GMT -5. The time now is 01:01 PM.