Steeda LCA's and No Grease Fittings?

Reply Subscribe

Thread Tools

Search this Thread

Aug 7, 2015 | 03:03 PM

JonnyBlazeGT

Thread Starter

1st Gear Member

Joined: Jun 2015

Posts: 82

From: NH

Steeda LCA's and No Grease Fittings?

I bought some new aluminum Steeda lca's with the 3 piece poly bushings and noticed that they don't have grease fittings... Should I be concerned?

Aug 8, 2015 | 10:31 AM

tj@steeda

3rd Gear Member

Joined: Jul 2011

Posts: 732

From: Florida

Hello Johhny,
Hope you are having a great weekend!

No, there is no reason to be concerned. They come pre-lubed, so just add the provided grease to the bushing faces upon installation.

Best Regards,

TJ

Aug 8, 2015 | 07:36 PM

JonnyBlazeGT

Thread Starter

1st Gear Member

Joined: Jun 2015

Posts: 82

From: NH

I wasn't provided with any grease. I assume I can just use some marine grease?

Aug 9, 2015 | 10:19 AM

Urambo Tauro

3rd Gear Member

Joined: Aug 2015

Posts: 939

From: SE Michigan

It's important to use a synthetic grease on poly bushings. Be generous with it. I used Green Grease for mine. It's waterproof and very sticky. Energy Suspension's Formula 5 Prelube is also a good choice.