4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

PLEASE READ THIS

Thread Tools
 
Search this Thread
 
Old Jun 3, 2007 | 08:10 PM
  #101  
spoolin shadow's Avatar
spoolin shadow
 
Joined: Jun 2007
Posts: 36
From: Owasso,OK
Default RE: PLEASE READ THIS

he did 380ish i think. i can ask him. and he was on street tires. spinning his *** off. with tires i believe he can do a 12.
Old Jun 3, 2007 | 08:13 PM
  #102  
Davojan59's Avatar
Davojan59
4th Gear Member
 
Joined: Apr 2005
Posts: 1,093
From: California
Default RE: PLEASE READ THIS

when i said stock i mean EVERYTHING stock. I bought it in cali and two months after i got to NC i went to the track. I drove it with the CEL on all the way from cali. As far as the run with the blower i ran a 12.7 on slicks but i was afraid to give it hell. I ran a 12.8 on street tires with the same setup. Oh and the CEL came on during the runs too....found out later on that i had a nasty fuel leak due to a hole in the fuel line burnt by the EGR pipe. All those new edge GTs u have been (if u really have) had horrible drivers and they were probly stock.

P.S. my 3.73 gears dont do that much more to the car since i already had 3.27s before. Now 4.10s or even 4.30s thats a whole different story
Old Jun 3, 2007 | 08:14 PM
  #103  
Hulk99's Avatar
Hulk99
3rd Gear Member
 
Joined: Sep 2006
Posts: 563
From:
Default RE: PLEASE READ THIS

ORIGINAL: spoolin shadow

he did 380ish i think. i can ask him. and he was on street tires. spinning his *** off. with tires i believe he can do a 12.
That makes a little more sense.
Old Jun 3, 2007 | 08:16 PM
  #104  
spoolin shadow's Avatar
spoolin shadow
 
Joined: Jun 2007
Posts: 36
From: Owasso,OK
Default RE: PLEASE READ THIS

ORIGINAL: Davojan59

when i said stock i mean EVERYTHING stock. I bought it in cali and two months after i got to NC i went to the track. I drove it with the CEL on all the way from cali. As far as the run with the blower i ran a 12.7 on slicks but i was afraid to give it hell. I ran a 12.8 on street tires with the same setup. Oh and the CEL came on during the runs too....found out later on that i had a nasty fuel leak due to a hole in the fuel line burnt by the EGR pipe. All those new edge GTs u have been (if u really have) had horrible drivers and they were probly stock.

P.S. my 3.73 gears dont do that much more to the car since i already had 3.27s before. Now 4.10s or even 4.30s thats a whole different story
hell yea 4.10's wake em up. yea i would like to race a new edge at the track. but i always get the comment "in that??!?!? hahahaha" i'm like "yea whats the matter don't wanna see the tail lights of it?" lol they usually back down. maybe i'll get a brave one to race lol.
Old Jun 3, 2007 | 08:17 PM
  #105  
spoolin shadow's Avatar
spoolin shadow
 
Joined: Jun 2007
Posts: 36
From: Owasso,OK
Default RE: PLEASE READ THIS

ORIGINAL: Hulk99

ORIGINAL: spoolin shadow

he did 380ish i think. i can ask him. and he was on street tires. spinning his *** off. with tires i believe he can do a 12.
That makes a little more sense.
yea when he told me he only ran that time. i was like wtf?? it should run better than that!!
Old Jun 3, 2007 | 08:22 PM
  #106  
Davojan59's Avatar
Davojan59
4th Gear Member
 
Joined: Apr 2005
Posts: 1,093
From: California
Default RE: PLEASE READ THIS

before my CAs i ran a measily 13.2 @ 12x mph but i was roasting my tires in second gear and almost lost it one time. Just the CAs alone put me down to 12.8 @ 113
Old Jun 3, 2007 | 08:25 PM
  #107  
spoolin shadow's Avatar
spoolin shadow
 
Joined: Jun 2007
Posts: 36
From: Owasso,OK
Default RE: PLEASE READ THIS

ORIGINAL: Davojan59

before my CAs i ran a measily 13.2 @ 12x mph but i was roasting my tires in second gear and almost lost it one time. Just the CAs alone put me down to 12.8 @ 113
i think he had a 108 mph.
Old Jun 3, 2007 | 10:25 PM
  #108  
CoolAid's Avatar
CoolAid
3rd Gear Member
 
Joined: Oct 2006
Posts: 824
From: Valley of the Sun
Default RE: PLEASE READ THIS

ORIGINAL: spoolin shadow

i haven't got ahold of a new edge mustang yet. but i'm sure i will lose.
WHAT?!?!? Damn......You musta really had me fooled. All that talk about blowing the doors off GTs and 4.6s all day long, man I thought you were Kenny Bernstein or something. Come to find out your bragging about beating a few NPIs in a Night at the Roxbury car? Sometimes this site just cracks me up....lol....
Old Jun 3, 2007 | 10:40 PM
  #109  
spoolin shadow's Avatar
spoolin shadow
 
Joined: Jun 2007
Posts: 36
From: Owasso,OK
Default RE: PLEASE READ THIS

ORIGINAL: CoolAid

ORIGINAL: spoolin shadow

i haven't got ahold of a new edge mustang yet. but i'm sure i will lose.
WHAT?!?!? Damn......You musta really had me fooled. All that talk about blowing the doors off GTs and 4.6s all day long, man I thought you were Kenny Bernstein or something. Come to find out your bragging about beating a few NPIs in a Night at the Roxbury car? Sometimes this site just cracks me up....lol....
with mods one can take me. stock i'm sure it will be a good race. i guess the van beating the gto and the shadow beating the z28 wasn't proof enough. i can get more video if you want. the 3 valve motors are good motors what can i say.
Old Jun 3, 2007 | 11:14 PM
  #110  
Xemeth's Avatar
Xemeth
5th Gear Member
 
Joined: Jul 2006
Posts: 4,951
From: CT
Default RE: PLEASE READ THIS

ORIGINAL: spoolin shadow

ORIGINAL: CoolAid

ORIGINAL: spoolin shadow

i haven't got ahold of a new edge mustang yet. but i'm sure i will lose.
WHAT?!?!? Damn......You musta really had me fooled. All that talk about blowing the doors off GTs and 4.6s all day long, man I thought you were Kenny Bernstein or something. Come to find out your bragging about beating a few NPIs in a Night at the Roxbury car? Sometimes this site just cracks me up....lol....
with mods one can take me. stock i'm sure it will be a good race. i guess the van beating the gto and the shadow beating the z28 wasn't proof enough. i can get more video if you want. the 3 valve motors are good motors what can i say.
New edge GT's are 2v's. 05+ is 3v. Mach 1's and Cobra's are 4v.



All times are GMT -5. The time now is 11:55 AM.