4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Would this actually work?

Thread Tools
 
Search this Thread
 
Old Jul 12, 2007 | 04:25 PM
  #1  
hochness's Avatar
hochness
Thread Starter
1st Gear Member
 
Joined: Dec 2006
Posts: 55
From:
Default Would this actually work?

Hello all,

Hopefully I post this in the proper thread.

What the heck is this and do you think that it would actually work?

For $60 plus shipping, if it really does boost a little, hey, I'll give it a shot.

http://cgi.ebay.com/ebaymotors/Ford-...ayphotohosting

Sam
Old Jul 12, 2007 | 04:49 PM
  #2  
ninelives19821's Avatar
ninelives19821
2nd Gear Member
 
Joined: Mar 2007
Posts: 188
From: Washington
Default RE: Would this actually work?

Yeah i have seen that thing too.... i dont see how it will make boost at high rpms though, seeing how theimpeller is turned by a small electric motor. I could be wrong lol, it may work for all i know.
Old Jul 12, 2007 | 04:49 PM
  #3  
Triisomy21's Avatar
Triisomy21
4th Gear Member
 
Joined: Apr 2006
Posts: 1,052
From:
Default RE: Would this actually work?

Dont' waste your money man.
Old Jul 12, 2007 | 04:51 PM
  #4  
POISND U's Avatar
POISND U
5th Gear Member
 
Joined: Nov 2006
Posts: 3,569
From: So Cal
Default RE: Would this actually work?

Get twins.....
Old Jul 12, 2007 | 05:05 PM
  #5  
blackstallion666's Avatar
blackstallion666
4th Gear Member
 
Joined: Jun 2007
Posts: 1,369
From: Cumberland County NJ
Default RE: Would this actually work?

if it really worked everyone would have had one by now
Old Jul 12, 2007 | 05:05 PM
  #6  
2002GTAUTOVERT's Avatar
2002GTAUTOVERT
5th Gear Member
 
Joined: Mar 2007
Posts: 2,441
From:
Default RE: Would this actually work?

BS... there is no easy way out when it comes to F/I
Old Jul 12, 2007 | 05:07 PM
  #7  
fiad06's Avatar
fiad06
5th Gear Member
 
Joined: May 2006
Posts: 3,480
From:
Default RE: Would this actually work?

next time post a thread like this in general disscusion!
Old Jul 12, 2007 | 05:56 PM
  #8  
hochness's Avatar
hochness
Thread Starter
1st Gear Member
 
Joined: Dec 2006
Posts: 55
From:
Default RE: Would this actually work?

Thanks for the info on the "super-dooper-charger". I thought that this was somewhat of a tech question but was unsure.

What kind of stuff do you post on this side?

Sorry for posting this on the wrong side.

Sam
Old Jul 12, 2007 | 05:57 PM
  #9  
derf's Avatar
derf
 
Joined: May 2007
Posts: 26
From:
Default RE: Would this actually work?

Electric supercharger....it's a cool idea. They say 2-3 psi but they don't say at what flow rate. Most likely at 0 cfm.But these V8 require a lot of air at WOT.I don't think that this little motor and impeller could provideenough air and deffinetly not any boost. In fact, Ithink that it would restrict flow instead of making any pressure at high rpms. Although I think that itwould work on a small displacement engine like a briggsand stratton or a small motorcycle.
Old Jul 12, 2007 | 08:48 PM
  #10  
juniortheredneck's Avatar
juniortheredneck
 
Joined: Feb 2007
Posts: 25
From:
Default RE: Would this actually work?

couple years ago when i had a me a fox body i got that same exact thing i didn't get all the parts that really were needed i have it sitting in my garage still and i always look at it and saymother F**kers.



All times are GMT -5. The time now is 09:57 PM.