HOW TO BEAT A MACH 1?
4th Gear Member
Joined: Mar 2007
Posts: 1,148
From:
RE: HOW TO BEAT A MACH 1?
ORIGINAL: 5speedstang
he has full bolt on mach and is running a 12.9 at the track. wow he needs a driver mod.
i have mid pipe weld in mufflers, cai, tuner and intake spacer and ran a 12.6 at 115.
he has full bolt on mach and is running a 12.9 at the track. wow he needs a driver mod.
i have mid pipe weld in mufflers, cai, tuner and intake spacer and ran a 12.6 at 115.
6th Gear Member
Joined: Jan 2004
Posts: 12,575
From: United States
RE: HOW TO BEAT A MACH 1?
ORIGINAL: 5speedstang
he has full bolt on mach and is running a 12.9 at the track. wow he needs a driver mod.
i have mid pipe weld in mufflers, cai, tuner and intake spacer and ran a 12.6 at 115.
he has full bolt on mach and is running a 12.9 at the track. wow he needs a driver mod.
i have mid pipe weld in mufflers, cai, tuner and intake spacer and ran a 12.6 at 115.
115 MPH trap is around 400-420 WHP.. I put down 420 WHP and only trapped at best (75 degree weather) 114.50 so far (out of about 6 good runs), and that was on a weak 1.9 60' which results in a bit better MPH (worse 60, better MPH).
Just no chance whatsoever. You would be lucky to break 300 WHP with that setup in a car that weighs at least 3400 pounds.
3rd Gear Member
Joined: Jul 2006
Posts: 627
From: Oahu, Hawaii
RE: HOW TO BEAT A MACH 1?
ORIGINAL: 5speedstang
he has full bolt on mach and is running a 12.9 at the track. wow he needs a driver mod.
i have mid pipe weld in mufflers, cai, tuner and intake spacer and ran a 12.6 at 115.
he has full bolt on mach and is running a 12.9 at the track. wow he needs a driver mod.
i have mid pipe weld in mufflers, cai, tuner and intake spacer and ran a 12.6 at 115.
5th Gear Member
Joined: May 2007
Posts: 2,795
From: Michigan
RE: HOW TO BEAT A MACH 1?
i trap at 106-108
with ported intake, slp1's, u/d's, k&n, 3.73's, o/r x. and ****ty street tires. (yes i know i am trapping high, due to me spinning up till middle of second)
with ported intake, slp1's, u/d's, k&n, 3.73's, o/r x. and ****ty street tires. (yes i know i am trapping high, due to me spinning up till middle of second)
6th Gear Member
Joined: Jan 2004
Posts: 12,575
From: United States
RE: HOW TO BEAT A MACH 1?
ORIGINAL: 01snake
i trap at 106-108
with ported intake, slp1's, u/d's, k&n, 3.73's, o/r x. and ****ty street tires. (yes i know i am trapping high, due to me spinning up till middle of second)
i trap at 106-108
with ported intake, slp1's, u/d's, k&n, 3.73's, o/r x. and ****ty street tires. (yes i know i am trapping high, due to me spinning up till middle of second)
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
Oct 2, 2015 01:27 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
Sep 27, 2015 03:16 PM
