problem with bumper letter insert
Thread Starter
3rd Gear Member
Joined: Feb 2007
Posts: 899
From:
problem with bumper letter insert
I am having problem with the bumper letter inserts and the lower bumper deck.
i got them from baltimorestreetmod and follow the instructions.
They keep peeling off.
they areso difficult to apply.
any advice guys?
thanks,
i got them from baltimorestreetmod and follow the instructions.
They keep peeling off.
they areso difficult to apply.
any advice guys?
thanks,
2nd Gear Member
Joined: Feb 2008
Posts: 284
From:
RE: problem with bumper letter insert
i got quite alot of graphics on my car including 2 tribal mustangs that cover my doors and the trim like on the new mustangs below it
just go to ebay and search mustang bumper inserts and its like 10 bucks...all you gotta do is wipe off the dirt and make sure its dry and place the letters in...if theres any air bubbles just take a needle and put a tiny hole in the bubble and smoothe it out
all my decals have been on for months and are still perfect
just go to ebay and search mustang bumper inserts and its like 10 bucks...all you gotta do is wipe off the dirt and make sure its dry and place the letters in...if theres any air bubbles just take a needle and put a tiny hole in the bubble and smoothe it out
all my decals have been on for months and are still perfect
Thread Starter
3rd Gear Member
Joined: Feb 2007
Posts: 899
From:
RE: problem with bumper letter insert
thanks for the reply guys.
i did wash the car. clean it with the solution provided by the instruction.
do i apply them when the surface is dry? the instruction told me to spray the the surface so it wet and place the letter in place. when it wet it doesn't stay on.
may be i'm doing it wrong.
i did wash the car. clean it with the solution provided by the instruction.
do i apply them when the surface is dry? the instruction told me to spray the the surface so it wet and place the letter in place. when it wet it doesn't stay on.
may be i'm doing it wrong.
2nd Gear Member
Joined: Feb 2008
Posts: 284
From:
RE: problem with bumper letter insert
some instructions say do it while its wet but i think its much easier if you do it while its dry
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
Thread Starter
3rd Gear Member
Joined: Feb 2007
Posts: 899
From:
RE: problem with bumper letter insert
ORIGINAL: 5speed01GT
some instructions say do it while its wet but i think its much easier if you do it while its dry
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
some instructions say do it while its wet but i think its much easier if you do it while its dry
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
YANKEES #1....... lolz
i was trying to put them on earlier while they were wet. I got **** and took them off and put them back on the paper.
are they still good?
or do i have to get anew one?
thanks.
4th Gear Member
Joined: Sep 2006
Posts: 1,803
From: TAXO
RE: problem with bumper letter insert
ORIGINAL: 5speed01GT
some instructions say do it while its wet but i think its much easier if you do it while its dry
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
some instructions say do it while its wet but i think its much easier if you do it while its dry
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
so it's a built 4.6???? I want to see a pic...
MF Staff Snitch
Joined: Jun 2006
Posts: 7,041
From: Scotia, NY
RE: problem with bumper letter insert
make sure you strip off the wax and all before you apply. thats something a friend made the mistake of... they didnt stick well
umm....
13.5? pics or it didnt happen. also, engine pics....and your car does 60 - 0 in 4.5 seconds? nice brakes![8D]
ORIGINAL: 5speed01GT
some instructions say do it while its wet but i think its much easier if you do it while its dry
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
some instructions say do it while its wet but i think its much easier if you do it while its dry
look at my car on my mspace at www.myspace.com/tarponpimp
i did all of them my self and its been months with absoultly no problems
just get the letters again from ebay like i did and try it again
umm....
13.5? pics or it didnt happen. also, engine pics....and your car does 60 - 0 in 4.5 seconds? nice brakes![8D]
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
Sep 16, 2015 07:53 PM