4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

*Project JB Interior*

Thread Tools
 
Search this Thread
 
Old May 24, 2008 | 09:24 PM
  #1  
JonBeast's Avatar
JonBeast
Thread Starter
Moderator
 
Joined: Jan 2005
Posts: 8,625
From:
Default *Project JB Interior*

Its been a long time coming but I've finally made some major steps in my tan to black interior conversion. I have had a steering wheel and carpet sitting in my basement for over a year haha But since I moved from PA to NJ, and we needed some space, it lit the fire under me to finally put the carpet it.
So I ripped out my entire interior and got to work. I didn't take any pictures of the process, and I'm pissed now that I didn't...but imagine a completely tan interior, and now what it is haha.
Here is what I did:
New center console, new carpet, new steering wheel, new air vents, new glove box, and other miscellaneous pieces
As for the dash, door panels, rear panels, kick panels, etc...I used Duplicolor Vinyl and Fabric black spray and it turned out amazing.
Here is where I am so far:










Issues:
1. The steering wheel that I bought that I thought was black, is noticeably gray...I ordered a black one, but it looks like it is the grey color in the 99-04 interiors. So I need to figure something out with that.
2. Also, with my fresh carpet, my "black" floor mats look grey now as well.
3. I need to put my mach460 speakers back in (took them out last summer when I took my mirrors off to paint them, haven't put them back on since haha)
4. Need to put my rear speaker covers back on
5. Need to put my brake and clutch pedal bullitt pedals on (PITA)

NOW THE TO-DO LIST
1. I need black seats! I am looking at summit and hunsaker vinyl racing seats right now, I am rolling around in one tan seat and it looks terrible haha I also would love to get my hands on some cobra seats...I'm in the market for anything
2. Black rear seat delete
3. New head unit
4. Convertible top cover (tonnue cover, but not a speedster one, however I will be getting one eventually)

As soon as I get some seats and a rear seat delete...its gonna be time for some new wheelsGoing to be going with black wheels this time around.

Old May 24, 2008 | 09:32 PM
  #2  
wisk's Avatar
wisk
4th Gear Member
 
Joined: Jun 2006
Posts: 1,168
From: texarkana, tx · 903
Default RE: *Project JB Interior*

Looks great.
Get an FR500 steering wheel
Old May 24, 2008 | 09:35 PM
  #3  
jrherald420's Avatar
jrherald420
5th Gear Member
 
Joined: May 2007
Posts: 4,524
From: Smyrna, TN
Default RE: *Project JB Interior*

the black looks good it looks stock 2 me. id say that summit would be the cheapest place for seats. or a salvage yard(good luck there!) seeing yours makes me want to paint my mark VIII's tan interior black......
Old May 24, 2008 | 09:55 PM
  #4  
4.698GT's Avatar
4.698GT
4th Gear Member
 
Joined: Jan 2005
Posts: 1,984
From: Port Monmouth, New Jersey
Default RE: *Project JB Interior*

how is your driver seat? Are you getting a black leather to match? My driver's seat is getting pretty bad and im just slowly looking for a replacement
Old May 24, 2008 | 10:02 PM
  #5  
ZW99GT's Avatar
ZW99GT
6th Gear Member
 
Joined: Nov 2004
Posts: 7,797
From: Tennessee
Default RE: *Project JB Interior*

That looks awesome. I'd love to do that to mine! How hard was it to pull the dash?
Old May 24, 2008 | 10:49 PM
  #6  
ponysnake99's Avatar
ponysnake99
4th Gear Member
 
Joined: Oct 2006
Posts: 1,541
From: Durham, NC
Default RE: *Project JB Interior*

Nice match up on the spray and factory colors, how many cans/layers did it take to cover the whole dash?

BTW ZW99GT, the dash isnt too hard to remove, after dropping the steering wheel, glove box and finding all the connectors, you need to eat your weaties that morning because the dashis like lifting rosie o'donald. Ive got mine sitting inmy shop right now.
Old May 24, 2008 | 11:17 PM
  #7  
hpwrestler220's Avatar
hpwrestler220
6th Gear Member
 
Joined: Oct 2006
Posts: 6,817
From: NJ
Default RE: *Project JB Interior*

looks really good.. nice job man
Old May 24, 2008 | 11:50 PM
  #8  
JonBeast's Avatar
JonBeast
Thread Starter
Moderator
 
Joined: Jan 2005
Posts: 8,625
From:
Default RE: *Project JB Interior*

ORIGINAL: ZW99GT

That looks awesome. I'd love to do that to mine! How hard was it to pull the dash?
I didn't pull the dash, I just taped it off.

The paint was amazing, its more-so a dye...it only took like 2-3 coats to do the job. It dries in literally 3 minutes.
Old May 24, 2008 | 11:53 PM
  #9  
JonBeast's Avatar
JonBeast
Thread Starter
Moderator
 
Joined: Jan 2005
Posts: 8,625
From:
Default RE: *Project JB Interior*

ORIGINAL: 4.698GT

how is your driver seat? Are you getting a black leather to match? My driver's seat is getting pretty bad and im just slowly looking for a replacement
Yea I am shopping around for seats right now...the seat is in pretty good shape, its got the usual cracks on it, but it is really comfortable and the sides aren't breaking down or anything. I would give you my two front seats for a case of beer haha we are only like 45 mins away, once I get some seats we could meet up if u want.
Old May 24, 2008 | 11:55 PM
  #10  
JonBeast's Avatar
JonBeast
Thread Starter
Moderator
 
Joined: Jan 2005
Posts: 8,625
From:
Default RE: *Project JB Interior*

ORIGINAL: ponysnake99

Nice match up on the spray and factory colors, how many cans/layers did it take to cover the whole dash?

BTW ZW99GT, the dash isnt too hard to remove, after dropping the steering wheel, glove box and finding all the connectors, you need to eat your weaties that morning because the dashis like lifting rosie o'donald. Ive got mine sitting inmy shop right now.
Dash probably took less than a can, I only painted the bottom since the top was already black from the factory.

Overall I used less than 4 cans of paint.

I wanna name my car, like a project name...you guys have any ideas? I was thinking like...Project Shade, or Project Shaded...something like that i dont know...something cool.



All times are GMT -5. The time now is 09:36 PM.