Okay I had bbk under drive pulleys on my car and I kept getting check engine light so I re touqued the crank pulley then my car start squiling and would feel boggy at low rpm really bad then it would be almost normal at high rpms. I put my stock pulleys back on and the same problem is happening the car act really boggy down low like it doesn't want to move then when it reaches high rpm it back normal and o yea I did buy a new crank pulley bolt.

 

Why didn't you just scan for the code rather than take the pulleys off?

Get a scan tool or find an automotive store that scans for free. Until then, quit messing around with blind repairs before you get yourself in trouble.