4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Killed by an Ls1

Thread Tools
 
Search this Thread
 
Old Sep 6, 2008 | 08:55 PM
  #1  
sn8kebite's Avatar
sn8kebite
Thread Starter
1st Gear Member
 
Joined: Aug 2008
Posts: 57
From: Brighton NY
Default Killed by an Ls1

Since i cant post in the S&S section yet (idk why, i have "gear" membership, isnt that the requirement?) I will post it here.

I ran a local guy's cam only Camaro SS tonight. The car is a 6 speed, has a decent size cam (i forget exactaly what one, but i believe its in the 230's) Full exhaust and an FAST manifold along with 3.73 gearing. We lined up 3 times from 20mph and went until about 140 ish, each time we were door to door until after 110 ish. He would pull ever so slightly in the top of his 3rd gear and then pull a bit more in 4th to the point where he had a half car on me in the first 2 runs and then a good full car on me on run 3. I was very impressed by this. Does this sound about right? i consider myself a good driver and i can hit my shifts well, that car just seems to pull better up top.
Old Sep 6, 2008 | 09:02 PM
  #2  
03mineralGT's Avatar
03mineralGT
 
Joined: Mar 2008
Posts: 34
From:
Default

That sounds about right. LS1s top end is simply amazing. Did he have a hidden nitrous bottle?
Old Sep 6, 2008 | 09:04 PM
  #3  
sn8kebite's Avatar
sn8kebite
Thread Starter
1st Gear Member
 
Joined: Aug 2008
Posts: 57
From: Brighton NY
Default

Originally Posted by 03mineralGT
That sounds about right. LS1s top end is simply amazing. Did he have a hidden nitrous bottle?
nope N/A... I have seen spray/cam Ls1's before, it would have been a lot worse for me.
Old Sep 6, 2008 | 09:04 PM
  #4  
nemo's Avatar
nemo
1st Gear Member
 
Joined: Feb 2008
Posts: 111
From:
Default

What else does that SS have in it, cuz your cobra should be pulling atleast 430hp at the crank. I know the 02 SS has like 330hp at the crank. Personally I think you should have taken him. But then again an SS with a cam and gears, and full exhaust is a deadly combo.
Old Sep 6, 2008 | 09:12 PM
  #5  
Sxynerd's Avatar
Sxynerd
6th Gear Member
 
Joined: Feb 2006
Posts: 11,786
From: Virginia
Default

THat's why i'm going NA LS2 in the mustang.
Old Sep 6, 2008 | 09:15 PM
  #6  
03mineralGT's Avatar
03mineralGT
 
Joined: Mar 2008
Posts: 34
From:
Default

Originally Posted by sn8kebite
nope N/A... I have seen spray/cam Ls1's before, it would have been a lot worse for me.
Yea...definitely would have. I have a 97 LT1 T/A with a large cam, gears, lid, MSD, and just a small shot of the happy gas haha. Its my weekend warrior and I have a hard time with just cammed, geared, and lid LS1s. The LSx engine is the car gods gift to earth haha.
Old Sep 6, 2008 | 09:45 PM
  #7  
02 Ninja's Avatar
02 Ninja
5th Gear Member
 
Joined: Aug 2006
Posts: 3,075
From: Central Texas
Default

Again, for all the naysayers. Regardless of how you feel about the "Bow Tie", if you pull up to one on the streeets, you better have your sh*t together or you'll be sent home unhappy and posting how you got your *** kicked on some forum.
Old Sep 6, 2008 | 10:09 PM
  #8  
03mineralGT's Avatar
03mineralGT
 
Joined: Mar 2008
Posts: 34
From:
Default

Here is a quick vid of my car...http://www.youtube.com/watch?v=7FZX4...eature=related

I "sold it" for one week haha...Guy didn't give me money so I took it back and have since decided to keep it.
Old Sep 6, 2008 | 11:13 PM
  #9  
ctgreddy's Avatar
ctgreddy
6th Gear Member
 
Joined: May 2007
Posts: 6,277
From: Dearborn, MI
Default

well a bolt on/cammed ls1 has 400horse potential to the wheels if the cams large enough. you car however should be well over that with the mods you have. i've gotta say he was hiding something from you or something, just dosen't make sence.
Old Sep 6, 2008 | 11:15 PM
  #10  
defconfire's Avatar
defconfire
5th Gear Member
 
Joined: Mar 2007
Posts: 3,791
From: Cary/Charlotte, NC
Default

+1 I was think something is not right. he could have had heads.



All times are GMT -5. The time now is 05:32 AM.