Ok, so some of you know that i was putting this bad boy in last weekend. I had promise to post up pics of the install, so here they are.....

Please, no post il i am done posting pics!!!


Removing accessories form manifold

 

Unbolting fuel rails/ manifold from engine

 

Pulled manifold off of the engine

 

Remover manifold seals, cleaned area around man. ports, and taped them so no debris falls in them

 

S/C before install

 

Placed s/c in engine valley

 

Different angle

 

Bolted everything down, installed ALT brackets(you have to grind a piece of the ALT for it to fit), reinstalled the ALT backwards onto the bracket, connected factory TB and CAI(The JLT intake will not fit!), installed coolant resevior, put the heat exchanger in. Then filled it with 70% water and 30% coolant. Ran the cooling system to purge any air from it. installed BAP in trunk and put the KB computer chip in.

Entire install took my father and i one weekend.(with beer..LOL!!)

 

Diff angle of completed install