MustangForums.com

4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Trick flow dyno numbers

Thread Tools
 
Search this Thread
 
Old 03-24-2009, 04:54 PM
  #1  
GTRACER88
5th Gear Member
Thread Starter
 
GTRACER88's Avatar
 
Join Date: Dec 2007
Location: Houston, Tx
Posts: 2,112
Default Trick flow dyno numbers
http://www.modularfords.com/forums/s...121612&page=84

Post 669
GTRACER88 is offline  
Reply
Old 03-24-2009, 05:06 PM
  #2  
Sxynerd
6th Gear Member
 
Sxynerd's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
Default
That's crap... The All new design needs a little work.
Sxynerd is offline  
Reply
Old 03-24-2009, 05:10 PM
  #3  
Tim99GT
4th Gear Member
 
Tim99GT's Avatar
 
Join Date: Dec 2007
Location: Lafayette, LA
Posts: 1,700
Default
great gains. I would like to see what the gains are for the heads alone. Also, any 1 heard of a release date yet?? the money is starting to burn a hole in my pocket. I need some heads and cant take the wait anymore.
Tim99GT is offline  
Reply
Old 03-24-2009, 05:16 PM
  #4  
cobra dreamer
2nd Gear Member
 
cobra dreamer's Avatar
 
Join Date: Jan 2008
Location: ma
Posts: 308
Default
i wonder if those are std#'s or corrected and it that was at the flywheel or rear wheel

and i think the fisr graph is just the heads nothing else
cobra dreamer is offline  
Reply
Old 03-24-2009, 05:17 PM
  #5  
cobra dreamer
2nd Gear Member
 
cobra dreamer's Avatar
 
Join Date: Jan 2008
Location: ma
Posts: 308
Default
sorry double post
cobra dreamer is offline  
Reply
Old 03-24-2009, 05:20 PM
  #6  
Tim99GT
4th Gear Member
 
Tim99GT's Avatar
 
Join Date: Dec 2007
Location: Lafayette, LA
Posts: 1,700
Default
well from the later post, they question the same thing. "Greg" is suppose to be checking with the dyno guys to find out.
Tim99GT is offline  
Reply
Old 03-24-2009, 05:40 PM
  #7  
2000AZ5.0GT
5th Gear Member
 
2000AZ5.0GT's Avatar
 
Join Date: Jul 2007
Posts: 3,731
Default
well the last one, 407hp at the motor, is pretty damn good for a 2V. That would be a good 360rwhp
2000AZ5.0GT is offline  
Reply
Old 03-24-2009, 06:07 PM
  #8  
JayC
4th Gear Member
 
JayC's Avatar
 
Join Date: Jul 2004
Location:
Posts: 1,860
Default
Originally Posted by 2000AZ5.0GT
well the last one, 407hp at the motor, is pretty damn good for a 2V. That would be a good 360rwhp
There are a few making ~350rwhp with a bump in compression, cams and ported heads with a STOCK PLASTIC MANIFOLD. Sorry, but I don't see these over-priced heads being the Holy Grail !
JayC is offline  
Reply
Old 03-24-2009, 06:11 PM
  #9  
2000AZ5.0GT
5th Gear Member
 
2000AZ5.0GT's Avatar
 
Join Date: Jul 2007
Posts: 3,731
Default
Originally Posted by JayC
There are a few making ~350rwhp with a bump in compression, cams and ported heads with a STOCK PLASTIC MANIFOLD. Sorry, but I don't see these over-priced heads being the Holy Grail !

really? I didn't know that. good for them.

Didn't the 407hp one say it was cam/heads/intake? and no bump in compression?
2000AZ5.0GT is offline  
Reply
Old 03-24-2009, 06:19 PM
  #10  
stangalator
4th Gear Member
 
stangalator's Avatar
 
Join Date: Apr 2008
Location: New York
Posts: 1,306
Default
not too bad, if the price was lower
stangalator is offline  
Reply



Advanced Search
Quick Reply: Trick flow dyno numbers


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 05:49 AM.