4.6L engine ?'s
Im needing some help building my engine up. I really have no idea what i need to do or order parts wise. The reason im asking is because i have a procharger running 12lb of boost on a stock 4.6 motor and everyone i have talked to is telling me I need to build the engine because there worried ill blow the bottom end out of it. i would greatly appreciate the help
|
Originally Posted by 1995procharged
(Post 6427276)
Im needing some help building my engine up. I really have no idea what i need to do or order parts wise. The reason im asking is because i have a procharger running 12lb of boost on a stock 4.6 motor and everyone i have talked to is telling me I need to build the engine because there worried ill blow the bottom end out of it. i would greatly appreciate the help
yep 12 lbs is pushing it, i'd go 10 tops on a stock bottom end or a forged bottom end and ~15 lbs. |
yea thats what i was thinking i ordered a 10lb from procharger last week just waiting on it to get here.I was told it would cut it from 12psi to about 8psi.
|
Is it a npi 4.6 or a pi motor? 12psi on a npi motor would probably be ok intercooled because your most likely not making as much power as a pi motor on 12psi.
|
Originally Posted by Chris98Gt
(Post 6430686)
Is it a npi 4.6 or a pi motor? 12psi on a npi motor would probably be ok intercooled because your most likely not making as much power as a pi motor on 12psi.
|
It probably is still a npi setup, if it's intercooled 12psi will still probably be under the safe limit on hp if its got a good tune. I'd get it tuned and see where its at and go from there.
|
A 95 is a 5.0 wrong section
|
Originally Posted by steve0914
(Post 6431941)
A 95 is a 5.0 wrong section
|
Oh dee da dee
|
do yourself a favor and buy a forged shortblock from d.s.s racing or a company like that, youll save a little bit of cash going with one of there engines than rebuilding it yourself between parts and machine work.
|
All times are GMT -5. The time now is 07:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands