GT emblems pic needed
01-08-2010, 07:49 PM
#12
2nd Gear Member
Join Date: Sep 2007
Location: Westminster, Maryland
Posts: 357
i don't remember seeing any locating pins on the GT emblems when i took it off. the only pins i remember seeing were on the back of the Ford logo. i just took a picture of mine on my phone before i removed them, had my trunk painted, then used the picture as a reference to put them back on.
01-08-2010, 09:01 PM
#13
5th Gear Member
Thread Starter
Join Date: Sep 2009
Location: KY, was MA
Posts: 2,797
oh ive read on here that the GT/XXth Anniv. logos on the fenders have locating pins. the GT on the trunk does not because i already took that off. the Ford logo on the trunk does have pins as well but im not removing that
01-09-2010, 03:37 PM
#15
5th Gear Member
Thread Starter
Join Date: Sep 2009
Location: KY, was MA
Posts: 2,797
wasn't really looking for opinions....just an answer and it is MY car so i think i could do what I want with it. rather put money into somethig worth it. there is $30 i dont NEED to spend. thought of it so i inquired about it here to get an answer
so....anyone with a pic?
so....anyone with a pic?
Last edited by smitty2919; 01-09-2010 at 03:39 PM.
01-10-2010, 08:44 AM
#19
aka 'Negative Nancy'
Join Date: Jul 2007
Location: Ohio
Posts: 4,839
no pics of fender...but theres the backside of the emblem...i put arrows where the pins are, its hard to tell since theres so much adhesive left on them...the small pin kinda looks like a + and the big pin looks like O
01-10-2010, 12:50 PM
#20
1st Gear Member
Join Date: Oct 2008
Location: Oklahoma
Posts: 58
GT Emblem pics of backside
I don't have a picture of the fender either, but I recently removed/replaced my GT emblems and here's a picture of the backside of the one that I didn't break removing. I gave basic measurements though so you get a rough idea of the area you'll need to cover. Also be aware that the holes in the fender are slightly dimpled, as in not perfectly flat stamped holes in the fender. Hope this helps some....
