I bought a new 2011 F150 and joined and F150 forum and those guys are Plasti-dipping like crazy over there!

I thought that the factory bullit wheels on my black 04 GT might look good with the center spokes plastidipped black.

Has anyone done this and have any pics ???

 

There was at least one whole thread dealing with that plastidip and how it was being used on everything, including the wheels. You didn't even have to dismount the tires... if you got some overspray on the tires, you just peeled it off after it dried. Some people were even painting over the plastidip... if they ended up not liking the new color or wanted to change it up again, they just peeled off the plastidip and did it again.

Try doing a search for plastidip on here....

 

Here ya go

 

that looks really good, spoiler, taillights, and fuel door really set it off

 

Only downside I see is... as you can see I was about to get new tires and the tire machine chewed off the plastidip around the edges. I've hit the edges again but I doesn't look as good so I'm going to pull all the old off and Respray them again. And as for the fuel door and in between the taillights its actually just some matte black vinyl I bought in bulk really cheap... but its got some bubbles in it. Si when I warms up I'm pulling it off as well and spraying that. Also the
inlay on the hood. Spoiler is krylon satin black spray paint. But it'll be dipped as well

 

from the plastidip website: http://www.plastidip.com/blog/2012/0...th-plasti-dip/