5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

A new problem

Thread Tools
 
Search this Thread
 
Old Mar 5, 2006 | 04:39 PM
  #1  
Tims 88GT's Avatar
Tims 88GT
Thread Starter
6th Gear Member
 
Joined: Jan 2005
Posts: 7,657
From:
Default A new problem

Ok I was checking my oil today, and I loosened my oil pan plug and to my surprise it was green, now I do not have a problem with white/gray smoke or anything, but I don't know why there is freez in my oil, I don't know where I should start looking, I do not think it is a head gasket because the car does not run warm, or smoke.
Old Mar 5, 2006 | 04:41 PM
  #2  
ikeybmg's Avatar
ikeybmg
5th Gear Member
 
Joined: Feb 2006
Posts: 3,915
From: Southwest VA.
Default RE: A new problem

dang, does sound like a head gasket, right? maybe its just leaking gasket now blown yet, id check em anyways because i dont know what else that ould be right off.
Old Mar 5, 2006 | 04:45 PM
  #3  
Ninety5five0's Avatar
Ninety5five0
5th Gear Member
 
Joined: Nov 2005
Posts: 3,311
From: Katy, Texas
Default RE: A new problem

Possibly the lower intake ?
Old Mar 5, 2006 | 04:45 PM
  #4  
Low_5.0's Avatar
Low_5.0
2nd Gear Member
 
Joined: Jul 2005
Posts: 248
From:
Default RE: A new problem

Thats sounds wierd that it would be green, normally when Anti-freeze is mixed with oil, it will turn milky white!!!...odd that it's green
Old Mar 5, 2006 | 04:46 PM
  #5  
marx91's Avatar
marx91
3rd Gear Member
 
Joined: Dec 2005
Posts: 926
From:
Default RE: A new problem

maybe do a compression test to be sure, i've also seen that happen from a blown
lower intake gasket antifreeze got into everywhere
Old Mar 5, 2006 | 04:55 PM
  #6  
Tims 88GT's Avatar
Tims 88GT
Thread Starter
6th Gear Member
 
Joined: Jan 2005
Posts: 7,657
From:
Default RE: A new problem

ok well the other day I had the valve cover off, because I was checking my rockers and stuff, and I had a heater hoes that was leaking and I bumped it a lil and some freeze went in the motor, I have not run in since so it went straight to the bottom of the pan, im going to go run it and see how warm it gets and everything, I will let you know what happens, thanks for the help. p.s. it was like a table spoon of freeze
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
69Volunteer
Classic Mustang General Discussion
1
Sep 30, 2015 10:39 AM
marc954
4.6L General Discussion
8
Sep 29, 2015 03:05 PM
marc954
New Member Area
2
Sep 25, 2015 06:48 AM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
Sep 21, 2015 11:01 AM
Big Al's 03
Mach 1 Section
4
Sep 21, 2015 07:59 AM




All times are GMT -5. The time now is 03:26 PM.