5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Will 295's rub the front???

Old 04-24-2006, 12:30 AM
  #11  
Low_5.0
2nd Gear Member
Thread Starter
 
Low_5.0's Avatar
 
Join Date: Jul 2005
Location:
Posts: 248
Default RE: Will 295's rub the front???

well, that why i asked, i think im gonna get 265/35/18's all the way around, i dont think i'll have a problem then
Low_5.0 is offline  
Old 04-24-2006, 12:32 AM
  #12  
ikeybmg
5th Gear Member
 
ikeybmg's Avatar
 
Join Date: Feb 2006
Location: Southwest VA.
Posts: 3,915
Default RE: Will 295's rub the front???

you need to PM blacksnake, he has 18s on a fox. ask him what size he uses.
ikeybmg is offline  
Old 04-24-2006, 12:36 AM
  #13  
Low_5.0
2nd Gear Member
Thread Starter
 
Low_5.0's Avatar
 
Join Date: Jul 2005
Location:
Posts: 248
Default RE: Will 295's rub the front???

it's not a Fox...my car is a 95
Low_5.0 is offline  
Old 04-24-2006, 12:39 AM
  #14  
ikeybmg
5th Gear Member
 
ikeybmg's Avatar
 
Join Date: Feb 2006
Location: Southwest VA.
Posts: 3,915
Default RE: Will 295's rub the front???

well hell, ask me then..lol. mine has 18x9 on front. i have 255 35 18. they will barely rub on a tight turn. im lower 2in. i have 285 in the back. they clear the quads by an inch and scrub none. 295 would fit the back, but not the front. i wont get bigger than 265 for the front. my rear is a 10inch.
ikeybmg is offline  
Old 04-24-2006, 12:39 AM
  #15  
jasonc84
1st Gear Member
 
jasonc84's Avatar
 
Join Date: Apr 2006
Posts: 105
Default RE: Will 295's rub the front???

well the notch i just bought has 275s in the front and they barely rub, so i'm guessing 295s will rub like crazy.
jasonc84 is offline  
Old 04-24-2006, 12:40 AM
  #16  
Low_5.0
2nd Gear Member
Thread Starter
 
Low_5.0's Avatar
 
Join Date: Jul 2005
Location:
Posts: 248
Default RE: Will 295's rub the front???

i think 265 will be good all around, then i can rotate tires too....i dont wanna replace big back tires all the time
l
Low_5.0 is offline  
Old 04-24-2006, 12:41 AM
  #17  
ikeybmg
5th Gear Member
 
ikeybmg's Avatar
 
Join Date: Feb 2006
Location: Southwest VA.
Posts: 3,915
Default RE: Will 295's rub the front???

what size rim? width
ikeybmg is offline  
Old 04-24-2006, 12:42 AM
  #18  
Low_5.0
2nd Gear Member
Thread Starter
 
Low_5.0's Avatar
 
Join Date: Jul 2005
Location:
Posts: 248
Default RE: Will 295's rub the front???

18x9
Low_5.0 is offline  
Old 04-24-2006, 12:45 AM
  #19  
ikeybmg
5th Gear Member
 
ikeybmg's Avatar
 
Join Date: Feb 2006
Location: Southwest VA.
Posts: 3,915
Default RE: Will 295's rub the front???

27535 will look better all around. it will not scrub bad at all. just dont turn as hard as the wheel will go. they might just barely touch the inner well but just barely when you turn the wheel sharp as it will turn. the 265 will not look as good on the back. and youre wheel will stick out past the tire some, leaving it vulnerable to curb rash.
ikeybmg is offline  
Old 04-24-2006, 12:47 AM
  #20  
Low_5.0
2nd Gear Member
Thread Starter
 
Low_5.0's Avatar
 
Join Date: Jul 2005
Location:
Posts: 248
Default RE: Will 295's rub the front???

that is the tire size that Saleen recommends for there wheels...im hoping it would do what u descirbed, i might change my mind about the tire size and staggar the front and back, a wide tire on the front will catch every pot hole and crack...so i've been told!
Low_5.0 is offline  

Thread Tools
Search this Thread
Quick Reply: Will 295's rub the front???



All times are GMT -5. The time now is 01:37 AM.