Bump Steer kit -- Please help
Thread Starter
1st Gear Member
Joined: May 2006
Posts: 107
From:
Bump Steer kit -- Please help
I installed the UPR bump steer kit and I was wondering if anyone else has installed it also. And how did you setup the bushings? Or any other bump steer kits.
Spindle
Mid-sized
Tie rod
Small-sized
Big-sized
Spacer
Nut.
P.S. also let me know if you have the X2 ball joints and/or offset rack bushings.
Spindle
Mid-sized
Tie rod
Small-sized
Big-sized
Spacer
Nut.
P.S. also let me know if you have the X2 ball joints and/or offset rack bushings.
4th Gear Member
Joined: Jan 2006
Posts: 1,527
From:
RE: Bump Steer kit -- Please help
Did a bump steer kit on my car. I went with a Steeda one though. Actually all you have to do is try to get the tie rod end parrallel with the a-arm. Just mess around with the bushing/spacers until you get it to about parrallel.
Thread
Thread Starter
Forum
Replies
Last Post
Lethaldosage423
Archive - Parts For Sale
1
Oct 19, 2015 12:12 AM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
Oct 5, 2015 07:16 AM