installed cobra intake today
so today I installed a cobra intake, now it wont start, I hooked evrything back up with the exception of the egr, and i do not have an egr eliminator, is this my problem? I have an adjustable fuel pressure reg set at 40 psi, normal bolt ons, nothing changed with the exception of the intake and egr block off plate, like I said no elim though, IS THIS MY PROBLEM?
|
RE: installed cobra intake today
did you remove the dizzy? no egr, the car should still run
|
RE: installed cobra intake today
ORIGINAL: WOTdaddy so today I installed a cobra intake, now it wont start, I hooked evrything back up with the exception of the egr, and i do not have an egr eliminator, is this my problem? I have an adjustable fuel pressure reg set at 40 psi, normal bolt ons, nothing changed with the exception of the intake and egr block off plate, like I said no elim though, IS THIS MY PROBLEM? |
RE: installed cobra intake today
the dizzy? not familiar with that one, I maked the dist. set it back to where it was, even checked for 180 out of time but i am not, removed the core from the schrader valve, installed gauge. I di get one big backfire from tail pipes third time I tried to start it, but other than that it has not attempted to start
|
RE: installed cobra intake today
if it back fired you need to recheck timing....i'm sure it's 180 off.
|
RE: installed cobra intake today
Do you know how to check and see if you put the dizzy back in right?? If so, check again. You mentioned that you marked the distributor, but did you mark where the rotor was pointing also?
|
RE: installed cobra intake today
exactly!...:eek:
|
RE: installed cobra intake today
You bein a smart ass grabbem??? :D
|
RE: installed cobra intake today
no i was agreeing wit ya fool
|
RE: installed cobra intake today
no i was being the smart ass
|
All times are GMT -5. The time now is 09:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands