since nobody in OT looked at my thread I thought I would post it here

for slicks do you need to run a driveshaft loop? and what is the rule for harnesses?

 

You have to be running a certain et for the loop I believe and not sure about the harness.

 

well my friend has a got a cobra expecting to go 10's in phoenix, and were just trying to get it setup so he doesnt get booted off the track

 

LOL, then I would think he would need pretty much everything under the sun!!!

 

A DL loop is manditory anytime a sticky tire is used. He will also need a 6 point roll bar, and the harness's . There are also some SFI items that he might need as well, such as an SFI pressure plate, if running a stick and an SFI balancer. Your best bet is to find an NHRA rule book and go from there. MY guess is that if your asking about this and are thinking 10's your going to get booted. My idea would be to go make a few 1/8 mile runs to get you 60 foot down and then make one last full rip at the end of the day.

 

well hes got a 6 point cage ordered from wolfe, and getting a safety loop along with harnesses. Guess ill google and hope for the best

 

I have one somewhere let me know if you don't have any luck with google.

 

prime im from phoenix and JD hit it right on the money of what you need.

 

alright well the car is going to be entered into true street at FFW so if anyone could give me a list of what he needs Id appreciate it

 

prime i would call amp performance because they are the main sponsor of the event and they build track cars.