Best bang for your buck top end kit
im lookin for top end kit..
i see that you can get h/c/i trickflow for $2500 are there any other kits out there? is it worth it? |
RE: Best bang for your buck top end kit
There are a lot of different kits out there. But if you want the best bang for the buck, then piece together your own kit (gt-40 hears from old Explorers, etc.)
|
RE: Best bang for your buck top end kit
A track heat will outflow a GT-40 though. Also, you will gain the most power if you piece together your own kit BUT most likely it will be more expensive if you buy everyting all new... plus the HP numbes will not be that much more... maybe 20?
Also, I thought that the TF kit was like $2,200? But dont forget about supporting mods. TB, MAF, injectors, fuel pump, afpr, etc. |
RE: Best bang for your buck top end kit
i hear gt40 heads are weird.. do i have to use a gt40 intake?
i have hedman equal shortys.. do i need new headers? what kind of hp gains should i expect with a set of gt40 heads, intake, headers, and the supporting mods and cam |
RE: Best bang for your buck top end kit
a good bang for the buck head is victor juniors. nice big head that you can grow into. may lose velocity to start out but you can grow into them, especially ported. you could get some ported vic jrs. for less than afrs and they'll outflow the out of the box afrs. if you really want to go very top end get afrs
|
RE: Best bang for your buck top end kit
well by top end i mean heads and up..
|
RE: Best bang for your buck top end kit
haha ya that makes sense now i realized it after i read it, hoped no one would notice [&:] i still stick with the vic jrs though lol. o ya and an efi manifold, than a custom cam.
|
RE: Best bang for your buck top end kit
do you think my hedman headers would work for a gt40 head? also what intake would i have to have?
|
RE: Best bang for your buck top end kit
If your gonna go the gt40 route, id get the gt40P's, they outflow the 40's, but you have to get diff. headers with them because of the sparkplug angle, they almost go strait in.
|
RE: Best bang for your buck top end kit
so thats why you need different headers..
i never knew.. what about intake? will it bolt up to any aftermarket intake? edelbrock? tf? what headers are you running? |
All times are GMT -5. The time now is 09:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands