ok, im wanting to put a cam in my car. its all stock right now, exhaust is high on the list... and w. the exhaust id love to do a cam and get that nice lope... future plans involve heads and intake, but right now as $ permits im just going to do a cam, i know it wont give me much performance, but itll sound nice for now, and when i do my heads and intake, the cam will already be there... so the ? is whats a good cam to put in her? i want something noticable, and that will give me good performance when i do my heads and intake, but nothing over the top... and suggestions guys? (ps.. this is more of a thought, dont know that ill acutally do it anytime soon, just doing my research tho)

 

bump....

 

stock heads/motor, go with the E303 unless you plan on doing more, if so, get a comp ground for your planned combo.

 

plan on eventually going trickflow heads/intake...i could just do the cam them... but was thinking of doing the cam now, for sound... knowing it wont help much right now... unless there is one that will??? and then when heads/intake comes the cam will already be there...

 

but that will be a long time from now
will i notice an e303 cam? feel any diff/hear a diff?

 

light lope, power-band shifted upwards in the rpm band to where you make peak hp a ittle over 5000rpm or so, 10-15whp gain.

 

hm... sounds good to me...is that the best for stock?jw? and light lope like w the slps i plan to get ill no theres a cam in it right? jw again... justthinkin ahead...

 

Since you plan on going with a better setup later, its just a cheap cam that will do about as well as anything else with the anemic E7 heads.

 

ok... the better set up wont be for a while, long enough that i may do a better cam then.. so lets pretend i wanna stay stock heads... is this the best cam for me then? hey dude thanks for your help

 

No, im sure you could buy a better one, call comp cams. The E is pretty good for stock though imho.