<FONT face="Arial, Helvetica, sans-serif" color=black size=3>Ok here is the deal. I have a 1995 Ford Mustang 5.0. And whenever the car is off it goes into all the gears jsut fine. However, Whenever I start the car it will not go into any of the gears. Any ideas what it could be? The clutch and PP seems fine. You can push in the clutch pedal and it starts the car.</FONT></P>

 

Is it the stock t-5?

 

dude, it does sound like it's the clutch. -- that happened to my 90 and it didnt seem like the clutch at all....but guess what....it was...

 

I have to agree with whitehawk. Change the clutch, its not disengaging, change the clutch cable quadrant while you are in there. Could be either one really.

 

and if ur keeping the stock tranny u might want 2 consider a steel bearing retainer.

 

also replace the clutch fork also and that ole pilot bearing

 

good luck getting the piot bearing out. me and my dad chizzeled it out. it took bout 3 hours. couldnt find a puller smal enough. and replace the read main while the transmission is out of the car.

 

if you have to replace the clutch you may as well upgrade to a better one. it is def worth the money.

 

i hope you go with a centerforce clutch

 

89muscle.....snap-on has a nice tool for it..takes about 2 mins..I feel your pain though