bbk intake dyno results finally in
 

5.0 mustangs and super fords finally did a test on the new bbk intake. the test was done on a 93 cobra. mods included were a stock cam, computer, and #24 injectors on a stock spec 306 shortblock, edlebrock performer rpm heads, bbk 1 5/8-inch full length headers, an h pipe and a smog pump eliminator. the intake was a stock intake with a little port job done to it. here are the results.....

..................STOCK 5.0 INTAKE...............BBK SINGLE STAGE INTAKE
..................STOCK THROTTLE BODY.......BBK 75MM THROTTLE BODY
RPM............TORQUE....POWER................TORQ UE...........POWER
1,600..........229...........70................... ....222..................68
1,850..........238...........84................... ....243..................85
2,100..........243...........97................... ....246..................98
2,350..........246...........110.................. ...248..................111
2,600..........253...........125.................. ...253..................125
2,850..........271...........147.................. ...266..................144
3,100..........277...........164.................. ...279..................165
3,350..........286...........183.................. ...285..................182
3,600..........289:)......198..................... 288..................198
3,850..........285...........209.................. ...292..................214
4,100..........280...........219.................. ...296:).............231
4,350..........273...........226.................. ...294..................243
4,600..........262...........230.................. ...291..................255
4,850..........253...........233:)................ 283..................262
5,100..........238...........231.................. ...273..................265:)
5,350..........215...........219.................. ...255..................260

RE: bbk intake dyno results finally in
 

dont believe everything you read - especially in 5.0 & MM&FF, I dont see that being possible considering the Cobra intake is already pretty good... Im sure the heads helped though

RE: bbk intake dyno results finally in
 

i thought it was a 302.....oh well. i guess not bad gains, but, thats not a complete stock car. imo its actually a good buy, cuz the egr is made into the manifold, comes with fuel rails, so, really, its probably not a bad idea, but, i dont want one.

RE: bbk intake dyno results finally in
 

hey md they did it on a stock 5.0 h.o intake not the cobra one. dont ask y buts its deffintly a 93 cobra. i guesse they juss put an h.o intake on there to compare it with a stock one

RE: bbk intake dyno results finally in
 

ttt

RE: bbk intake dyno results finally in
 

decent numbers hell the intake is worth buying just for the look IMO

RE: bbk intake dyno results finally in
 

ttt

RE: bbk intake dyno results finally in
 

I read that sh it in 5.0 mag on a stock engine.. then seem all the mods on the "stock" engine...coarse it fools better as the intake was the restriction because of the mods*L*..damn misleading ads!

RE: bbk intake dyno results finally in
 

Those numbers arent impressive. Especially over stock! Here check this out http://www.andersonfordmotorsport.com/media/waves.htm I think these are better gains.:D But yea it does look cool.But im about numbers.

RE: bbk intake dyno results finally in
 

a little expensive on the twister made by pro products if u ask me. good numbers tho