How does this sound???
#1
How does this sound???
Pulling motor.... the stock 302 sucks and has too many probs, (leaks anti-freeze, broken headbolt, etc.)
cant find a 351 roller motor so I am going to doa 331 stroker build that will consist of :
Eagle Crank
Scat rods
Probe Pistons 9.65:1 compression ratio
ARP main Studs and Rod studs
RHS 200 58cc aluminum heads
Comp Cams XFI Stroker cam
Ford Racing 1.6 roller rockers
Ford Racing Hyd. Roller lifters.
Melling Oil Pump
ARP pump shaft
Cobra upper and lower intake
70 mm bbk tb
24lb injectors
c&l 76mm maf for 24lb
bbk adj fuel press reg.
bbk short tube equal lenth headers
holley 255lph pump
is this a good setup? I already have everything that is in bold
cant find a 351 roller motor so I am going to doa 331 stroker build that will consist of :
Eagle Crank
Scat rods
Probe Pistons 9.65:1 compression ratio
ARP main Studs and Rod studs
RHS 200 58cc aluminum heads
Comp Cams XFI Stroker cam
Ford Racing 1.6 roller rockers
Ford Racing Hyd. Roller lifters.
Melling Oil Pump
ARP pump shaft
Cobra upper and lower intake
70 mm bbk tb
24lb injectors
c&l 76mm maf for 24lb
bbk adj fuel press reg.
bbk short tube equal lenth headers
holley 255lph pump
is this a good setup? I already have everything that is in bold
#4
RE: How does this sound???
ORIGINAL: 94StinkinLincoln
only thing i would change would be the injectors to 30 and get a eddy, holley, or Tf manifolds.
only thing i would change would be the injectors to 30 and get a eddy, holley, or Tf manifolds.
#5
RE: How does this sound???
Sounds nice. Iam in agreement to all them with the new intake(upper&lower) and i would switch to 30 injectors so theres good airflow and enough fuel for it to burn up. All in all though good set up.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM