EVER SEEN THESE?
 

http://www.tristatecylinderhead.com/...products_id=57

HAVE ANY OF YOU HEARD OF SOMEBODY USING THESE HEADS. THEY'RE E6 CASTINGS IT SAYS, IS THAT GOOD OR BAD?

RE: EVER SEEN THESE?
 

craaapppola :D

RE: EVER SEEN THESE?
 

RE: EVER SEEN THESE?
 

they kick ass


if you are shooting for bottom end grunt like in a 4x4 or something [8D]

RE: EVER SEEN THESE?
 

If you pay $550 for some e6's your pretty stupid. They are worth about $2 dollars scrap and thats about it.

RE: EVER SEEN THESE?
 

Ford 5.0 High Swirl
$649.99 $550.00

http://www.tristatecylinderhead.com/...ixel_trans.gif







http://www.tristatecylinderhead.com/...gh%20Swirl.JPG
Click to enlarge
Ford E6SE Castings (pair) Highly Modified:D
64cc Combustion Chambers
1.94" Stainless Intake Valves
1.50" Stainless Exhaust Valves
Springs Good To .550" Hyd. Roller
Machined & Built With 3/8" Screw-In Suds
Guide Platess Included
Exhaust Runners Ported For Better Flow

100% Satisfaction Guaranteed!

RE: EVER SEEN THESE?
 

See if they have bench test flow data on them.
Gotta take those "flow" numbers with a grain a salt, but at least
it would be something to give a comparison of how "mod'd" they really are.

They have 1.9 intake valves like the GT-40's,rocker studs and .550 lift springs so
it looks like the right parts were used.

Cant beat $550 for the pair if they flow anywhere close to GT-40X or Y turbo swirl aluminum heads.

RE: EVER SEEN THESE?
 

I have a set that I ported the crap out of ....I mean I really spent alot of time opening them up and smoothing all the intake runners down and I openened up the exhaust big time...I've yet to use them cause I'm going to have them fitted eventually with bigger valves but I'll have less then 400.00 in them when I'm done and they should flow close to if not better then gt.40's.....we'll see......[:-]

RE: EVER SEEN THESE?
 

I'm betting you made them worse? did you cc every port and chamber? that heads isn't worth putting 100 in..when you can find sweet lightly usedaluminum ones for 550.00

RE: EVER SEEN THESE?
 

guys they are E6 HEADS!!!

THE WORST 302 HEAD EVER DESIGNED