alright guys, im really bored. i dont know what else to mod on sheila. i got everything pretty much covered. i cant afford heads right now so dont even go there!!! lol...

i need something thats relatively cheap that can gain me a few hundreths .05 or .07 seconds on the quarter.

any suggestion is welcome, weight reduction, drivetrain mod... anything that i can do right now besides heads and cam. thanks doodz.



P.S

here is what i got for bolt ons

MSD wires, 6AL, blaster
BBK headers, TB, H-pipe
3.73 gears
73mm MAF and CAI
ported cobra intake (going on this weekend)
electric rad fan
underdrives
180 thermo
pinion snubber
upper/lower control arms and lakewood shocks
aluminum driveshaft
all smog gone
battery relocated
AFPR @ 42 psi
i also just bought a brand new duralast battery because mine crapped out
150 amp alternator
prothane engine mounts (going on this weekend)
energy tranny mount (going on this weekend)
subframes (going on this weekend)
new summit harmonic balancer
new plugs and O2 sensors too

cant really remember what else i did to her... but you get the point, i dont know what else to get lol...




by the way i started modding my interior with diamond plate. my armrests were all chewed up and so some of the interior plastic. im gonna fab my own diamond plate to fit there. so far some of it looks good, i took pics.

 

save money and get heads

 

if the car is mainly for racing delete thr rear seat, depending, may be a clutch, thats all i can think of

 

you could put it on the bottle, but that could be risky i like the sound of a rear seat delete i would like to do that but i have not seen a kit to do it.

 

its my daily driver, i usually dont take people places but im young and have friends and sometimes i need to drive a bunch of people somewhere so i need my rear seat.


i was thinking maybe some lighter corbeau racing seats for the front. but maybe i should save up for some heads. i dunno im just bored lol

 

get some drag radials

 

well heres a rear delete kit for anyone inttrested(in my opinion a little pricy) google rear seat delete and u can find a do it your self instructions.
http://store.cal-mustang.com/cm_able...TID=28&CM_SA=0

 

not a bad idea, but if i get tires i want really really fat ones and i cant fit fat ones on stock rims. so ill need new rims which will cost $$$$ because i want to convert to 5 lug and 31 spling axles too.. tires lead to a sh-tload of expenses so cant do that...

then again i can just get 255/50/15 drag radials for now until i get money for a complete 5 lug rear. i might do that.

 

Eibach drag launch kit. It's 4 new springs with an airbag in the right rear. $269 from summitracing. Eibach claims they take 0.4 seconds of your quarter.

 

do you have a part number for this????!!! ::drool::