Halp with distributor install!!!!
01-17-2008, 07:21 AM
2nd Gear Member
Thread Starter
Join Date: Feb 2007
Location:
Posts: 242
Halp with distributor install!!!!
Well ive done my search but still lost i just did my h/c/i and the car is missing threw out the all the rpm range. My question is if with the timing light i see 10 deg on the balencer can my distributor still be a tooth of making my car run like its missing.
01-17-2008, 10:55 AM
6th Gear Member
Join Date: Feb 2006
Location: Howard City, MI
Posts: 5,956
RE: Halp with distributor install!!!!
No, you should be fine.
01-17-2008, 01:10 PM
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
RE: Halp with distributor install!!!!
did you get a wire crossed??? double check your firing order
01-17-2008, 01:26 PM
2nd Gear Member
Join Date: Sep 2007
Location:
Posts: 334
RE: Halp with distributor install!!!!
+1 with MJR.....Its not your dist. my guess would also be crossed or loose plug wire....
01-17-2008, 02:18 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2007
Location:
Posts: 242
RE: Halp with distributor install!!!!
ill check i might have a loose plug wire ill tell you guys tonight.
01-17-2008, 04:15 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2007
Location:
Posts: 242
RE: Halp with distributor install!!!!
thanks everyone i had a bad saprk plug wire
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mtgldr
S197 Handling Section
5
02-03-2024 09:00 PM
Omgitsa88Stang
5.0L General Discussion
5
10-05-2015 07:33 AM
StalkerGT
5.0L (1979-1995) Mustang
13
09-25-2015 02:41 PM
tj@steeda
Steeda Autosports
0
09-10-2015 08:39 PM