Question About Push Rod Length.
 

Alright, we're measuring for our pus rods. But we're new to this so I had a question. We put the rocker on and all that and rolled it over. We colored the top of the valve stem with sharpie to see how much area the roller is covering.

Heres' what we got, the worn away area in the middle of the valve is how much it traveled. Does it look ok ?

http://i184.photobucket.com/albums/x...4/P1050095.jpg

We ended up with a 6.25" push rod length.

Incase it matters, it has an E-cam, AFR 165 heads. Comp Cams Ultra Gold Roller Rockers.




~Thanks.

RE: Question About Push Rod Length.
 

6.250 is stock length and generally you should be checking with a solid lifter or a converted stock one to solid to view entire travel length..but looks good;)

RE: Question About Push Rod Length.
 

OK, so what we have looks ok ?


Sorry if I sound stupid but it's the first time either of us have done this.

RE: Question About Push Rod Length.
 

yeah looks good.......travel should remain in center 1/3 of stem tip and it looks like you have it...are you using the stamped steel rockers??;)

RE: Question About Push Rod Length.
 

Alright, thanks.

Using Comp Cams Ultra Golds, they're anodized Aluminum.

http://i184.photobucket.com/albums/x...4/P1050029.jpg

http://i184.photobucket.com/albums/x...4/P1050030.jpg

We got the heads torqued down tonight so we were measuring for the pus rods, heres a couple pics of the motor as it is now,

http://i184.photobucket.com/albums/x...4/P1050090.jpg

http://i184.photobucket.com/albums/x...4/P1050091.jpg

http://i184.photobucket.com/albums/x...4/P1050092.jpg

RE: Question About Push Rod Length.
 

looks nice!! what's the build??;)

RE: Question About Push Rod Length.
 

Thanks :D


Heres a link to FEP, Click the link that thread, I've never really brought the build to 5.0 I've always kept it OT I'm not sure why [&:]

Heres a link, also, that link to tippmann has pics on like every page. I take lots of pics.

http://vb.foureyedpride.com/showthread.php?t=61661