5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

car wont start

Thread Tools
 
Search this Thread
 
Old Sep 28, 2008 | 12:44 PM
  #21  
1988TTOP's Avatar
1988TTOP
Thread Starter
4th Gear Member
 
Joined: Jan 2008
Posts: 1,556
From: nw ohio
Default

yea and a good amount of fuel was comin out
Old Sep 28, 2008 | 12:48 PM
  #22  
calfroper_06's Avatar
calfroper_06
4th Gear Member
 
Joined: Jul 2008
Posts: 1,175
From: texas
Default

um if it was spraying good your probly fine but ust in caes i would check it when you get a chance, kinda seems more like ans ignition problem, have you check timing recently
Old Sep 28, 2008 | 01:00 PM
  #23  
1988TTOP's Avatar
1988TTOP
Thread Starter
4th Gear Member
 
Joined: Jan 2008
Posts: 1,556
From: nw ohio
Default

the timming was set to 10 dergees the last time i had it runing
Old Sep 28, 2008 | 01:18 PM
  #24  
calfroper_06's Avatar
calfroper_06
4th Gear Member
 
Joined: Jul 2008
Posts: 1,175
From: texas
Default

what does the cap rotor and wires look like
Old Sep 28, 2008 | 01:21 PM
  #25  
1988TTOP's Avatar
1988TTOP
Thread Starter
4th Gear Member
 
Joined: Jan 2008
Posts: 1,556
From: nw ohio
Default

the wires r band new frpp wires and the coil and cap and rotor r band new msd
Old Sep 28, 2008 | 01:22 PM
  #26  
calfroper_06's Avatar
calfroper_06
4th Gear Member
 
Joined: Jul 2008
Posts: 1,175
From: texas
Default

im still leaning toward the ingnition module, how did you test it
Old Sep 28, 2008 | 01:23 PM
  #27  
1988TTOP's Avatar
1988TTOP
Thread Starter
4th Gear Member
 
Joined: Jan 2008
Posts: 1,556
From: nw ohio
Default

took it to autozone
Old Sep 28, 2008 | 01:26 PM
  #28  
1988TTOP's Avatar
1988TTOP
Thread Starter
4th Gear Member
 
Joined: Jan 2008
Posts: 1,556
From: nw ohio
Default

i replaced the old dissy with a used one the old the sotor went out on it i have had this dissy in the car for a week but never drove it till saturday
Old Sep 28, 2008 | 01:29 PM
  #29  
calfroper_06's Avatar
calfroper_06
4th Gear Member
 
Joined: Jul 2008
Posts: 1,175
From: texas
Default

so you just replaced the dizzy, did it start after the install, and you reset your timing right
Old Sep 28, 2008 | 01:37 PM
  #30  
1988TTOP's Avatar
1988TTOP
Thread Starter
4th Gear Member
 
Joined: Jan 2008
Posts: 1,556
From: nw ohio
Default

yea it run great till i drove it on saturday



All times are GMT -5. The time now is 11:55 PM.