mustangmike33

ok guys i recently rebuilt my motor. i installed the NX-274-HR comp cam and edelbrock intake. i have been running an auto. with a 2600 stahl. but with the cam swap i decided to go bigger so i purchased a 3200 stahl from a guy here in town. it was used, but works well. or so i thought. so what im wondering is whats wrong with my car when i pull up to a redlight and it wants to pull. the car is in drive, with my foot on the brake and it just wants to pull once it idles down. if its truly a 3200 stahl it shouldnt do that right. with a stock convertor my b cam done that until i put in the 2600. not im back to the same old crap. so how big of a stahl do i need with that cam? or is it the stahl thats giving me problems. it did one time wanna pull so hard that it shut off. so whats the deal?