transmssion problems
05-17-2009, 05:24 PM
1st Gear Member
Thread Starter
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
transmssion problems
automatic transmission went out of my 96 mustang with a 302 engine i found 2 out of v 6 mustang 3.8 one has a 6.3 stamped on it the other a 6.6 will they work on a 302 if which is the best one to use, thanks help if u can
05-17-2009, 08:41 PM
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
96's didn't have 302's they had 4.6 v-8's now if some one put a 302 in it we need to know what tranny they used to begin with and is your v-8/302 a carbed or efi???
05-17-2009, 09:11 PM
1st Gear Member
Thread Starter
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
i put the 302 in the 1996 it it came with 3.8 v6 it had a automatic with the numbers 6.3 stamped on the top of the transmission where it bolts to the motor thank u
05-17-2009, 09:14 PM
1st Gear Member
Thread Starter
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
also it has the same bolt patern just wondering if it would hold up to the 302
05-17-2009, 09:15 PM
1st Gear Member
Thread Starter
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
05-17-2009, 09:18 PM
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
you need an AODE from a sn-95 if you are using sn-95 ecm and wiring harness
05-17-2009, 09:20 PM
1st Gear Member
Thread Starter
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
05-17-2009, 09:35 PM
1st Gear Member
Thread Starter
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
but which tranmission would be better thanks alot
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Seanam
V6 S197 General Discussion
5
10-04-2015 10:15 AM
mdj89
5.0L (1979-1995) Mustang
7
09-23-2015 08:49 AM
kachuy10
2005-2014 Mustangs
7
09-22-2015 01:27 PM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM
Big Al's 03
Mach 1 Section
4
09-21-2015 07:59 AM