speed density to mass air....
#1
speed density to mass air....
i recently swapped a 87 5.0 into my 93 foxbody that had a 2.3L and the wiring harness and computer almost connected to everything but i have a few questions.. if i get a 93 mass air harness will i be able to use the same computer? also i have heard of about some type of wiring to adapt speed density to mass air but im not sure how that works...?? caz anyone help?? i have everything connected and the car cranks but it doesnt start and theres no spark but i believe the connecter that is left alone takes power from the key to the computer and coil but im not sure and need some help.. anyone with ideas or have run into this problem before please help me.... thanks!!
#3
yea i understand that much.. i swapped over everything from the gt... engine trans rearend exhaust brake lines computer and harness... but the harness doesnt connect exactly to my car because its speed density and made for the 87 and my 93 is mass air... but i have found some harnesses on ebay for around 100 dollars or so and was wondering if i just need that or if i also need to get a mass air computer with it or if my computer i have with the 87 gt that had speed density will be ok or not??? ive been swapping everything since before christmas and its just not running so im really anxious on gettin it fixed... this is the last thing i need to do besides changing fluids...
#5
ok thanks.. cause i can find the harness and computer on ebay but its a couple hundred dollars where as just the harness is about 100 ... but i was pretty sure i would need the ecu also since one is mass air and the other is speed density.. and also the fact that my 93 has air bags and crash sensors and the 87 did not..
#7
ok thanks.. cause i can find the harness and computer on ebay but its a couple hundred dollars where as just the harness is about 100 ... but i was pretty sure i would need the ecu also since one is mass air and the other is speed density.. and also the fact that my 93 has air bags and crash sensors and the 87 did not..
Thread
Thread Starter
Forum
Replies
Last Post
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM