Ok I have a 1995 Cobra and i have a 9PSI SC on it and just installed a 11PSI pulley on it and im getting bigger Injectors for it and while i am at it i want to run my BOV to the atmosphere. Im going with an aftermarket BOV and getting rid of this POS Bosch BOV but one problem it that im going to end up running rich i need to know what all is required in running an open air BOV. My air sensor is before my SC i have the stock one that is right at the air filter.

 

You'll need a blow through MAF to mount the maf after the blower, and you'll mount the blowoff valve after the supercharger but before the MAF.

 

Where would i get the parts to do that with do you know of a website?

 

you should move this to the power adders forums, you will get alot more hits that way.