When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
So I have a 95 mustang Gt with a wet floor and I was just wondering if there is a known place they leak. Do I have to take out the whole rug to find this ?
So I have a 95 mustang Gt with a wet floor and I was just wondering if there is a known place they leak. Do I have to take out the whole rug to find this ?
Yuh huh, I did mine cause I could and so I wouldn't have any problems later when I swapped my 92 dash into my 87. What a terrible design Ford did with the heater boxes... Blower motor is against the firewall.. like WTF you have to remove everything just to replace the blower motor... *smack*
No they're not.... Never worked on a GM where I've had to pull out the heater box to change the motor, I've owned 4, and work at a shop, all just unbolt from the bottom or back of it, well from what I've worked on anyway.. which is all the mid 90's and older for the most part
i thought it was my heater core when my heat wasn't working but i figured out that there was no circuit getting to it. turns out when i took off the heating control panel thingy with the ***** the **** that controls the fan speed was melted completely... not sure at all how that happened