5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Installation help

Thread Tools
 
Search this Thread
 
Old 01-03-2004, 03:38 PM
  #1  
Moosetang
3rd Gear Member
Thread Starter
 
Moosetang's Avatar
 
Join Date: Oct 2003
Location:
Posts: 598
Default Installation help



I just bought a 94 GT and it came with a BBK Fuel Regulator but it is not installed. Where and how would i go about installing it. Also, it has a TrickFlow Street intake and the stock tower strut bar will not fit because of the taller intake. Do u have to buy an aftermarket bar or what. Thanks</P>
Moosetang is offline  
Old 01-03-2004, 05:38 PM
  #2  
mkspeed26
5th Gear Member
 
mkspeed26's Avatar
 
Join Date: Dec 2003
Location: Rochester, NY
Posts: 2,392
Default Installation help

www.maximummotorsports.com has the strut tower brace you are lookin for
mkspeed26 is offline  
Old 01-03-2004, 07:07 PM
  #3  
BLKSTANG9879
4th Gear Member
 
BLKSTANG9879's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 1,128
Default Installation help



Take it to a metal shop they will mod. it for you. It won't even cost that much.</P>


The fuel regulator is simple to installe. If it has came with directions, just follow them. If not just tell me. I'll tell you how. It only takes 5 minutes.</P>
BLKSTANG9879 is offline  
Old 01-03-2004, 07:57 PM
  #4  
Moosetang
3rd Gear Member
Thread Starter
 
Moosetang's Avatar
 
Join Date: Oct 2003
Location:
Posts: 598
Default Installation help

Alright thanks guys.
Moosetang is offline  
Old 01-03-2004, 09:09 PM
  #5  
n2o44
2nd Gear Member
 
n2o44's Avatar
 
Join Date: Jun 2003
Location: United States
Posts: 439
Default Installation help

from some experence make sure there room for that reg , i ve seen them interfere with trick flows , that might be why its not on there, hope you dont need the spacer
n2o44 is offline  
Old 01-04-2004, 01:47 AM
  #6  
Moosetang
3rd Gear Member
Thread Starter
 
Moosetang's Avatar
 
Join Date: Oct 2003
Location:
Posts: 598
Default Installation help

I have a 1 inch phenolic spacer if thats what your talken about.
Moosetang is offline  
Old 01-04-2004, 04:30 PM
  #7  
Moosetang
3rd Gear Member
Thread Starter
 
Moosetang's Avatar
 
Join Date: Oct 2003
Location:
Posts: 598
Default Installation help



Ilooked at my BBK regulator and it did not come with instructions. If you guys can help me out it would save alot of time. </P>


Thanks</P>
Moosetang is offline  
Old 01-06-2004, 11:15 AM
  #8  
03trubluestang
1st Gear Member
 
03trubluestang's Avatar
 
Join Date: Oct 2003
Location: United States
Posts: 129
Default Installation help

anyone have directions
03trubluestang is offline  




All times are GMT -5. The time now is 08:33 PM.