I have a 94 5.0 stock mustang gt I want to get it to 12's all engine. Can you guys suggest of what I should get to easily get that? I have only a Cold air intake on it right now and a 5.0 Pro Short shifter

 

heads, cam, suspension, gears, and the list goes on.... read what quik has been posting

 

dont forget fuel injectors with that set up. Also Tb and upper and lower intake manifold.

 

What should I do first and work my way to eventually?

 

stroke out the engine!!!

 

build it from the ground up

 

i say you can run in the 12's on motor and never remove the heads . first get some gears, at least 3.73 i would go with some 4.11, than of course , tb, and injectors , power pullies, retune the computer.and a good exaust system , that means good headers with a h or x pipe. if you have the cash maybe a upper intake =12 sec pass

 

thats not going to get you into the 12's.

 

Its a SN-95, not a notchback. I had a friend who had a 95' GT, fiberglass hood, rear seat delete, bucket seats up front, trickflow u/l manifold, 4:10's, limited slip, 24lb injectors, full msd ignition, rebuilt trans, pulleys, intake, throttle body, shorties, h pipe, and mac mufflers and was still in the 13's. It was an auto witch gives him some disadvantage but still. 12's with just exhaust, gears, tune, pulleys? Seems pretty hard to me, even with a 5spd.

 

that is just my opinon, but i think it could be done, it may be hader than the 79-93 cars , and it may be a 12.99 but it's doabale