swiftfox90

im going to be getting a 331 from dss racing what kind of heads i should get and such i dont want to run a super chager or nitrous. i want to make around 350hp is my goal, if i could just get some feedback on a setup that would be great thanks

88BlueGT

Do you want to make 350fwhp or 350rwhp? If I were you I would the 331 w/ their Pro-Lite pistons (flat top's) and run their AFR 185's. You shouldnt have a problem making them numbers w/ a setup like that. Also, are you leaving if EFI or are you carbing it? What manifold are you going to use? Do you know what cam yet? Didnt help alot but its something...

91stang

that's a a good kit i'm looking to get that kit also. before you get it i think you need to do a H/C/I setup to get it ready or do it at the same time.

here's a website that'll show you good heads...

http://www.allfordmustangs.com/Detailed/630.shtml

FullAuto

I'd look at a set of Twisted Wedge or AFR 185s if you can afford them.

primetime5.0

DSS sucks get something else, plenty of bad stuff coming from them lately

91stang

like what?

Grimace5.0

This was my DSS engine. It had about 50 miles on it and 4 oil changes. Started out with 60 psi of oil pressure and in the course of 5 miles had none. I won't get into all the BS that took place, but here are some visual aids if you can't read between the lines.

swiftfox90

well i called them today i think the setup im going with is the trick flow twisted wegde heads, e303 cam, and i dunno what intake yet because i have a gt-40 but i think i might want to get the holley one, not sure yet

primetime5.0

did you not see his pictures? and your still going to use them??!

88BlueGT

Go with CHP. Ive also been hearing bad things about their motors. I was going to go with a DSS Pro-Bulley long block from them but I was convinced by numerous people not to do business w/ them. So to everyone who saved me 4 G's!