mayhem motorsports

close to stock weaght i want to know what the cheapest and the most comfortable lowering springs are and i also like the stock ride but a lil stiffer wont hurt

MadMan@TheWheel

Eibach or Motorsports

MadMan@TheWheel

Of course you will get about 8 million different ideas. Which is great, but I'm just warning you. Very diverse are we

jtmustang

i am about to lower mine a little too which motorsports ones ride the best?

MadMan@TheWheel

http://www.fordracingparts.com/parts...rtKeyField=272

Cannot really go wrong, follow the chart you will see the choices are limited...lol

primetime5.0

FMS C springs

anthros

i used progressive rate road racing springs.... dare i say it "ebay" springs. it droped the front 2.2in, the rear 1.8in. During normal city driving, they ride ALOT better than stock, just enough give to make it comftorable and not like riding a buck board. But drive it agresivly and they shine, they have next to no body roll, and they hold onto the road VERY well. because of my drag shocks in the front i also have exellent weight transfer. It worked out to be a great middle ground between all out road racing, and all out drag racing. i like to acelerate hard, but i also love to carve the corners.

P.S. you WILL need C/C plates if droping 1.5 inches+ in the front, i didnt think i needed them at first but the shop could not quite get it into alighnment with the stock setup, and i noticed a big reduction in understear when i finally slapped on the plates to, the tires gripped like there supposed to.

stang8689

I like Eibach sportlines

OnyxCobra

H&R springs for high quality

ALMOST STOCK

Another for the H&R springs.